Victron

Continuous current: 400A. Peak current: 2000A during 1 second. Input voltage: 16-72 VDC. Over voltage disconnect: 16 V / 32 / 64 V. Current consumption when open: 4 mA. Emergency start: 30 s. Micro switch for remote monitoring. Status indication: Bicolour LED. Dimensions (HxWxD) / Weight: 78 x 102 x 110 mm / 0.9 kg.

The Cyrix Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix Battery Combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.

The Cyrix Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix Battery Combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.

The Cyrix-Li-load will disengage when its control input becomes free floating. If the battery voltage recovers after disconnection (which will happen when no other loads are connected to the battery), the output of the BMS will become high and the Cyrix will reengage after 30 seconds. After 3 attempts to reengage, the Cyrix will remain disengaged until battery voltage has increased to more than 13 V (resp. 26 V or 52 V) during at least 30 seconds (which is a sign that the battery is being recharged)

The Cyrix Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix Battery Combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.

The Digital Multi Control Panel GX is the same as the previous version, but with a new design. An extra advantage of this panel is the easy mounting: the included mounting frame allows the user to mount the panel from either front or back side. Due to the mounting frame, the mounting holes will no longer be in sight. The body of the GX panel is made of plastic, which makes the panel lighter and adds a modern look to the panel.

The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.

A modular DC busbar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system.

The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers. With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life.

MEGA-fuse holder, Holds all Victron MEGA-fuses.

The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.

The GX Touch 70 is a display accessories for the Cerbo GX. The large screen display gives an instant overview of the system and allows the user to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, the super slim waterproof design, top-mountable setup and simple installation bring alot of flexibility when creating a crisp and clean dashboard.

The MK3-USB allows a wide range of Victron products to connect to a computer for configuration and firmware updates.  

Indispensable in professional marine energy systems. It prevents electrolytic corrosion and above all serves as a device to guarantee a safe electric system. Toroidal wound technology for quietness and high efficiency. Soft start circuitry will ensure that the shore circuit breaker will not trip when plugged in.

Input: 115 or 230V. Output: 115 or 230V . Frequency: 50/60Hz. Rating: 32 / 16 A. Soft start. Transformer type: Toroidal (low noise, low weight). Input circuit breaker. Dimensions (HxWxD): 36.2 x 25.8 x 21.8 cm. Weight: 23 kg. Can be used as: 115V to 115V, 115V to 230V, 230V to 230V or 230V to 115V isolation transformer.

A modular DC bus bar, used to connect batteries to the Lynx DC distribution system.

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. It is available in two versions: 500A (with M8 busbar connections) and 1000A (with M10 busbar connections).

M8 circular connector Male/Female 3 pole cable 5m (Pack of 2) Extends the data cables that run from a 12.8 Volt Victron Smart Lithium Ion battery to the BMS

Victron MEGA-Fuse 125A/58V for 48V products (1 pc)

Victron Energy MEGA-fuse 200A/32V MPN: CIP136200010 Pack of 5 fuses

Victron Energy MEGA-fuse 250A/32V MPN: CIP136250010 Pack of 5 fuses

Victron Energy MEGA-fuse 80A/32V MPN: CIP136080010 Pack of 5 fuses

200A / 32V Victron MIDI-fuse. Supplied as a pack of 5.