Control Units and Remotes
Complete your Evolution autopilot system with an autopilot control head.
The new p70s and p70Rs feature vibrant colour displays and are powered by Raymarines intuitive LightHouse user interface.
LightHouse organises all options into simple menu structures, so with Evolutions Automagic 3-step setup process you will be up and running in minutes.
Raymarine p70Rs Colour Autopilot Control Head for Power Boat
The Raymarine p70Rs autopilot control head, with its combination of push-buttons and rotary control dial, is aimed at powered craft. Advanced LED backlighting offers low power consumption and delivers vibrant colour and contrast.
Raymarine p70s Colour Autopilot Control Head for Sail Boat
The p70s autopilot control head is a push-button operation controller designed primarily for sailboats.
All weather, low power, optically bonded display technology delivers brighter colours, sharper contrast, and a wide viewing angle.
Advanced LED backlighting offers low power consumption and delivers vibrant colour and contrast. Wide horizontal and vertical viewing angles ensure the display...
Raymarine Evolution ACU-100 Actuator Control Unit, Drive interface
The ACU-100 Autopilot control unit suitable for wheel drive, tiller drive and Type 0.5 hydraulic pump. Max continuous current 7 amps. No clutch output.
Raymarine Evolution ACU-200 Actuator Control Unit, Drive interface
The ACU-200 Autopilot control unit suitable for Type 1 hydraulic, linear and rotary mechanical drives. Max continuous current 15 amps. Has clutch output and can supply SeaTalk ng with 12 volt power. Supplied with rudder reference sensor.
Raymarine Evolution ACU-300 Actuator Control Unit, Drive interface
The ACU-300 Autopilot control unit suitable for solenoid controlled steering systems and Raymarine constant running hydraulic pumps.
Max continuous current 5 amps. Has no clutch output and can supply SeaTalk ng with 12 volt power. Supplied with rudder reference sensor.
Raymarine Evolution ACU-400 Actuator Control Unit, Drive interface
The ACU-400 Autopilot control unit suitable for Type 2 hydraulic, linear and rotary mechanical drives.
Max continuous current 30 amps. Has clutch output and can supply SeaTalk ng with 12 volt power. Supplied with rudder reference sensor.
Raymarine Evolution EV1 Sensor Core 9-axis pitch, roll, yaw and heading sensor
The EV-1 Sensor Core is at the centre of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing. Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards. Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions. Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes. Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays.
Raymarine Evolution EV2 Sensor Core 9-axis pitch, roll, yaw and heading sensor
The EV-2 is designed for the latest drive-by-wire steering systems. The intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing. Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards. Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions. Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes. Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays.
Raymarine S100 W/Less Remote+ST1/STNG Kt
Raymarine S100 Remote Control with Base Station and ST1 to STNG Adaptor Kit. The compact Raymarine S100 remote control gives you basic, onboard wireless control of any Raymarine SeaTalk autopilot, even if you're below deck and out of sight of your autopilot. Easy operation and intuitive menu structure for easy access to all features. The Raymarine S100 wireless control is powered by two AAA alkaline...
Raymarine Autopilot S100 Base Station
Smart controller / S100 Base Station
Raymarine S100 Wireless Autopilot Remote Complete with Base Station
The S100 remote control gives you basic, onboard wireless control of any Raymarine SeaTalk autopilot, even if youre below deck and out of sight of your autopilot. Easy operation and intuitive menu structure for easy access to all features. The Raymarine S100 wireless control is powered by two AAA alkaline batteries. Note requires SeaTalk 1 to SeaTalk ng converter to work with Evolution autopilots.