Grid
List
BEP 12V DC Circuit Breaker Panel 8-Way Vertical
Red LED indicates systems on
12V
Marine grade powder coated aluminium
ABYC standard voltage indication
Green LED backlit labels
Stylish clip on contour fascia
Label sets and busbar supplied with panels
Cut-out size - 10mm (3/8") inside all external edges
115 x 127
BEP Compact Marine Waterproof Panel 4 Switch Black
Compact panel size
Spray proof inline fuse holders with fuses included
Waterproof power receptacles (16A) in 5 & 3 way models
Waterproof to IP56
Switches rated at 20A DC
LxWxH is 95 x 107 x 75mm (3.75" x 4.25" x 2.9")
Panel supplied with label LBL-WP
Blue Sea Systems 4 Position, Below Deck Circuit Breaker Panel
Molded panel frame will stand up to UV and salt air making it perfect for power and sail boat electrical distribution.EASYLow profile makes it easy to install in tight spacesSIMPLE Fast-on circuit breaker connectors make it quick to wireCONVENIENTRed “ON” indicating LEDs for safe operation in low light condit
4 Carling Technologies™ 15A circuit breakers
Illuminated ON indication
Polycarbonate/ABS...
Case for Electrical Control Panel, with Lid, White
It is ideal for storing the boat’s electrical control panel. Made of UV-resistant high-grade ASA, it provides resistance to damage and chemical solvents. Preferably designed for internal use. UV-resistant cover, frame and container with a 150º opening door and a durable handle. It is specially designed with a non-skid surface and can be mounted vertically. This case is mounted with hidden...
Switch Panel 6 waterproof switches, Inox, 12/24V, 100x165mm
Switch Panel ''SP6 “Economy”, 6 waterproof switches, Inox, 12/24V, 100x165mm
Blue Sea Systems 6 Position, Below Deck Circuit Breaker Panel
Molded panel frame will stand up to UV and salt air making it perfect for power and sail boat electrical distribution.
EASYLow profile makes it easy to install in tight spacesSIMPLE Fast-on circuit breaker connectors make it quick to wireCONVENIENTRed “ON” indicating LEDs for safe operation in low light conditions
6 Carling Technologies™ 15A circuit breakers
Illuminated ON indication
...
Blue Sea CLB Circuit Breaker Block - 6 Gang
Compact surface mount solution providing secure screw termination where Push Button Reset-Only CLB Circuit Breakers are desired.
Quick connect clips allow circuit breakers to snap easily into place
Tin-plated copper busses and screw terminals
Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements
Easy to open clip on cover
Breakouts allow wire access...
Blue Sea CLB Circuit Breaker Block - 12 Gang
Compact surface mount solution providing secure screw termination where Push Button Reset-Only CLB Circuit Breakers are desired.
Quick connect clips allow circuit breakers to snap easily into place
Tin-plated copper busses and screw terminals
Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements
Easy to open clip on cover
Breakouts allow wire access...
Blue Sea CLB Push Button Circuit Breaker
Blue Sea CLB push button circuit breaker compatible with Blue Sea circuit breaker block, breaker sizes 5A - 40A
Branch circuit breakers (also used for 24-hour circuit protection)
Compact design enables high density circuit protection configurations
Push-to-reset operation
Trip Free design cannot be held ON during fault current condition
Specification:
Interrupting Capacity: 3,000A...
Digital Battery Test Switch Panel
LED Display. Measurable Voltage – 3v to 30v
Connects to two battery banks with selector switch for the display.
IP65
75.2mm wide
62.5mm high
53.5mm deep…
6 Gang 12v Aluminium Vertical Breaker Panel
6 Gang Vertical Circuit Breaker Panel
Stamped anodised black aluminum panel with 6 illuminated switches, circuit breakers and spare labels.
Panel rating: 12 volts
Individual Circuits: 1x10 amp, 1x8amp, 2x6amp, 2x3amp
Press to reset
Dimension A: 165mm
Dimension B: 115mm
Dimension C: 140mm
Dimension D: 89mm
Sea-Dog Aluminum Horizontal 6 Switch Panel
6 Switch Horizontal Panel
Stamped anodized aluminum panel with 6 illuminated switches and spare labels
Panel rating: 12 volts, 37 amps total.
Individual circuit 10 amps
Dimension A: 115mmDimension B: 165mmDimension C: 89mmDimension D: 140mm
Vetus Rocker Switch For Windscreen Wipers
Three-position switch (off,1,2) suitable for a single two-speed wiper motor.
Use with Vetus wiper motors RWS, DIN and HDMC but not suitable for model ORW.
Max. switching current: 20A
Max. panel thickness: 6mm
Vetus Rotary Windscreen Wiper Switch
Three-position switch (off,1,2) for one wiper motor. Type HDMSW, for two-speed wiper motors.
Suitable for wiper motors RWS, DIN and HDMC.
Not suitable for model ORW.
Max. switching current:
20A Max.
Panel thickness:7 mm
Push Button Horn Switch
Push Button Horn/Starter switch for flush fitting.
Waterproof Push Button Horn Switch with screw-in terminals.
12v DC 5amp
Hole size around 18/19mm
Button size around 25mm
Waterproof Toggle switch
Toggle Switch
On/Off panel mount toggle switch with waterproof cover.
Mounting aperture 12mm
12v 15a
Spade Terminal Connections
Toggle Switch 2 Position (on-off)
Thermo Plastic Toggle Switch 12v DC - Without Illumination
2 Position (on-off) dash mount toggle switch
15A 12v - 10A 24v
Toggle Switch 3 position
3 Position dash mount Toggle Switch On/Off/On
Max panel thickness 5mm
Mounting Aperture 12mm
Carling V Series Contura II Actuator - Running Lights
Carling Switch Actuator to fit Carling V Series Contura II Switches
Legend: Running Lights
Actuator only, switch sold separately
Carling V Series Contura II Actuator - Light
Carling Switch Actuator to fit Carling V Series Contura II Switches
Legend: Light
Actuator only, switch sold separately
Carling V Series Contura II Actuator - Horn
Carling Switch Actuator to fit Carling V Series Contura II Switches
Legend: Horn
Actuator only, switch sold separately
Carling V Series Contura II Actuator - Fan
Carling Switch Actuator to fit Carling V Series Contura II Switches
Legend: Fan
Actuator only, switch sold separately
Carling V Series Contura II Actuator - Windscreen Wiper
Carling Switch Actuator to fit Carling V Series Contura II Switches
Legend: Windscreen Wiper
Actuator only, switch sold separately
Carling V Series Contura II Actuator - Anchor Light
Carling Switch Actuator to fit Carling V Series Contura II Switches
Legend: Anchor Light
Actuator only, switch sold separately
Carling V Series Contura II Actuator - Bilge Pump
Carling Switch Actuator to fit Carling V Series Contura II Switches
Legend: Bilge Pump
Actuator only, switch sold separately
Carling V Series Contura II Actuator - Search Light
Carling Switch Actuator to fit Carling V Series Contura II Switches
Legend: Search Light
Actuator only, switch sold separately
Carling V Series Contura II Actuator - Plain with Lens Bar
Carling Switch Actuator to fit Carling V Series Contura II Switches
Legend: Plain with Lense Bar
Actuator only, switch sold separately
Carling V Series End Mounting Panel
End mounting panel for Carling V Series switches enables easy dash mounting.
Modular sections
Multiple mounting panels to create custom switch panel
Carling V Series Center Mounting Panel
Center mounting panel for Carling V Series switches enables easy dash mounting.
Modular sections
Multiple mounting panels to create custom switch panel
Carling V Series Single Mounting Panel
End mounting panel for Carling V Series switches enables easy dash mounting.
Modular sections
Multiple mounting panels to create custom switch panel
Carling V Series Contura II Switch On/Off
Carling V Series Contura II On/Off Switch Only.
Red LED Back Light
Switch Function: Standard On - Off
Specification:
Contact Rating: 20 amps 4 - 14V DC
15 amps 15-28V DC
Life: 50,000 - 100,000 cycles circuit dependent
Terminals: 6.3mm quick connect blade terminals
Order Actuator and switch housing separately
Carling V Series Contura II Switch Off/(On)
Carling V Series Contura II Off/(On) Switch Only.
Red LED Back Light
Switch Function: Off - (Momentary On)
Specification:
Contact Rating: 20 amps 4 - 14V DC
15 amps 15-28V DC
Life: 50,000 - 100,000 cycles circuit dependent
Terminals: 6.3mm quick connect blade terminals
Order Actuator and switch housing separately
Carling V Series Contura II Switch (On)/Off/(On)
Carling V Series Contura II (On)/Off/(On) Switch Only.
Red LED Back Light
Switch Function: (Momentary On) - Off - (Momentary On)
Specification:
Contact Rating: 20 amps 4 - 14V DC
15 amps 15-28V DC
Life: 50,000 - 100,000 cycles circuit dependent
Terminals: 6.3mm quick connect blade terminals
Order Actuator and switch housing separately
Carling V Series Contura II Switch On/Off/On
Carling V Series Contura II On/Off/On Switch Only.
Red LED Back Light
Switch Function: On - Off - On
3 position suitable for 2 speed wiper motor
Specification:
Contact Rating: 20 amps 4 - 14V DC
15 amps 15-28V DC
Life: 50,000 - 100,000 cycles circuit dependent
Terminals: 6.3mm quick connect blade terminals
Order Actuator and switch housing separately
Sterling Split Charge Diode
Sterling Split Charge Diode
A versatile battery management system which allows simultaneous charging through a diode system which ensures power is evenly distributed through the boats battery banks. Most boats have at least 2 battery banks, some have 3 and these tend to be the engine start battery, the domestic battery bank (please note that if you join three or four batteries together in your domestic...
Battery Isolator Switch
Battery Isolation Switch
Intended for isolating a single battery.
Can also be used for controling high current devices such as winches, windlasses, capstans etc.
Maximum Voltage: 24 Vdc
Maximum Surge Current: 500Amps for 10 seconds @ 12Vdc
Maximum continuous current: 100Amps/140Amps @ 12Vdc
Dimensions: 75mm x 60mm diameter
Terminal Stud Diameter: 10mm
Battery Master Switch
Suitable for one or two battery installations: to isolate or cluster the lighting and engine start circuits.
Capacity 150 A/h - 12 V.
Polycarbonate case, footprint diameter 134 mm, height 66 mm.
Easy surface mounting, supplied with instructions.
BEP 701 Contour Battery Master Switch 275A ON/OFF
This switch offers a number of unique features, the highlight being the patented Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches. The control knob can be removed by switching to an counterclockwise 45 degree position. This control knob also features an interchangeable labeling system allowing a full range of applications (Item # 713 or 715). Three...
BEP 701-MD Remote Operated Battery Switch, 275A Cont
The MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes, providing significant savings in expense and weight of copper battery cable. They are ideal for remote isolation of bow and stern thrusters.
Remote operation
Battery switch can...
BEP 716 Horizontal Battery Distribution Cluster for Single Engine with Two Battery Banks
The 716-H-140A-DVSR is an ideal replacement for a battery selector switch. Just remove the selector switch and connect the existing wires to a 716 cluster, no extra wires are required for a fully automatic battery management system. To be used in a single outboard dual battery bank system or in a single alternator inboard engine dual battery bank system.
No more flat start batteries
Electronics...
BEP Digital Voltage Sensitive Relay VSR 12/24V 140A
The Digital Voltage Sensing Relay (DVSR) allows the charging of a second battery bank from any single charging source. When the voltage on the charged bank rises sufficiently, the DVSR engages allowing the 2nd battery bank to charge. When charging stops and voltage falls, the DVSR automatically isolates the battery banks, ensuring that engine start batteries are kept fully charged. Digital circuitry...
Blue Sea Mini Add-A-Battery Kit - 65A
The Add-A-Battery includes a Dual Circuit Plus™ Battery Switch and an Automatic Charging Relay. These components simplify switching and automate charging, so that all you have to do is turn the battery switch ON when you arrive and OFF when you leave.
Dual Circuit Plus™ Battery Switch
Simplifies switching
Isolates engine and house circuits
Combines batteries for emergency starting
Tin-plated...
Marine Battery Box Black upto 100A/h 431x257x256mm
Plastic Battery Box
• External dimensions (LxWxH) = 431x257x-256mm
• Internal dimensions / Maximum battery size (LxWxH) = 339x199x224mm
• Can hold battery up to 339mm long, of various group sizes (e.g. 46, 53, 92 and others)
• Mounting equipment: Includes durable holddown fastening strap and foot clamps that secure the strap onto the supporting surface (screws not included)
•...
Marine Battery Box Black upto 120A/h 470x225x255mm
Plastic Battery Box
?• External dimensions (LxWxH) = 470x225x- 255mm
• Internal dimensions / Maximum battery size (LxWxH) = 385x175x225mm
• Can hold battery up to 385mm long, of various group sizes (e.g. 27, 49, 93 and others)
• Customisable length: Includes separator that divides the box into partitions, ranging from 50 to 330mm long
• Mounting equipment: Includes durable...
Marine Battery Box Black upto 80A/h 340x230x250mm
Plastic Battery Box
• External dimensions (LxWxH): 340x230x250mm
• Internal dimensions / Maximum battery size (LxWxH) = 280x195x230mm
• Designed for batteries up to 280mm long (of group sizes 24, 25, 34, 35, among others)
• Mounting equipment: Includes durable hold-down fastening strap and foot clamps that secure the strap onto the supporting surface (screws not included)
•...
Battery Isolator Switch c/w Protective Cap
Battery Isolation Switch with Protective Cap
Intended for isolating a single battery.
Can also be used for controling high current devices such as winches, windlasses, capstans etc.
Maximum Voltage: 24 Vdc
Maximum Surge Current: 500Amps for 10 seconds @ 12Vdc
Maximum continuous current: 100Amps/140Amps @ 12Vdc
Dimensions: 75mm x 60mm diameter
Terminal Stud Diameter: 10mm
Spare Red Key for Battery Isolator Switch
Spare Red Key for Battery Isolator Switch
Universal handy spare key for battery isolator switch
BEP Battery Management System
Heavy duty dual battery charging made easy, an ideal replacement for a Battery Selector Switch.
Simply remove existing selector switch and connect existing wires to a 716 cluster no extra wires are required for a fully automatic battery management system.
Fully automatic - No more flat start batteries.
Electronics protection from harmful engine start spikes.
Easy replacment for existing...