Victron Cyrix-Li-Charge Intelligent Charge Relay 12/24V - 230A
Item: CYR010230430
MPN: CYR010230430
The Cyrix Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix Battery Combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.
login to saveProduct Description
Voltage: 12/24v continuous current & Breaking capacity at 12V or 24V: 230A Current Consumption When Open: 4 mA Control Cable Included (Length 1 m): Yes LED Status Indication: Yes Protection Category: IP54 Dimensions: 65 x 100 x 50mm Weight: 0.27kG Warranty: 5 Years <a class="pagebuilder-button-primary" href="https://www.victronenergy.com/upload/documents/Datasheet-Cyrix-Li-ion-120-A-EN.pdf" target="_blank" style="text-align: center; font-weight: normal;"> <i class="fas fa-file-alt"></i> <span data-element="link_text" style="font-weight: 600;"> Datasheet</span> </a>The Cyrix-Li-Charge will connect a battery charger with 3 seconds delay: if the charge disconnect output of the VE.Bus BMS is high, and if it senses 13.0 V (resp. 26.0 V) or more on its battery charger connection terminal, and if it senses 2 V or more on its battery terminal(the Cyrix will remain open if not connect to the battery) The Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature. In general, a cell over voltage alarm will reset shortly after charging has been stopped. The Cyrix will then reconnect the charger after a delay 3 seconds When the Cyrix-Li-Charge is engaged (charger connected to battery) it will disengage after 1 hour to check if the charger is still enabled.. If, after the Cyrix has disengaged, the output of the battery charger immediately increases to 13.0 V or more, the Cyrix will reengage, with a 3 seconds delay. Note: In case of zero discharge current, or a small discharge current, the Cyrix will not disengage shortly after the charger has been switched off and/or disconnected, because battery voltage will remain higher than 13.5 V.Collect in Store
This item is available for collection.
People who bought this also bought...
