Repair Kits & Adhesives

Halkey Roberts replacement valve suitable for all inflatable boats, kayaks and SUP's with this particular valve system. Supplied as a 3 part system, inside, outside and valve cap. Threaded assembly for easy installation Sprung loaded centre valve pin for easy deflation Following markings on the main body of the valve: HRC PAT. NO. 4.478.587 & 690NSBV

Flexible water based acrylic latex sealant used internally for sealing porosity and minor leaks in Hypalon, PVC inflatables and similar fabrics. Simple and effective to use. Inflate the tube or tubes to be repaired and then remove valve system allowing the tubes to deflate, pour in the Sealflex liquid, reinflate the tubes and allow it to coat the inside of the tubes by lifting and rotating the boat...

Single part 70ml tube PVC Adhesive Solvent based polyurethene giving excellent adhesion to both plasticised and unplasticised PVC. Will bond a variety of surfaces including wood, canvas, leather, PVC, nylon fabric, polyurethane fabric and foam. Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex". Used by liferaft service stations...

PVC Adhesive 2 part 1L Tin & 40ml curing agent. Solvent based polyurathene giving excellent adhesion to both plasticised and unplasticised PVC. Will bond a variety of surfaces including wood, canvas, leather, PVC, nylon fabric, polyurathene fabric and foam. Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant...

Single part 70ml tube Hypalon adhesive Will bond natural rubber, polychloroprene, butyl, nitrile, hypalon and polyurathene rubber materials, rigid PVC, wood, leather and metal (metal should be primed with 2799 primer). Not for use on plasticised PVC Excellent resistance to heat, salt water and humidity.

Repair kit for emergency repairs, which is supplied in hard waterproof container with tamper proof lid. A handy item to keep on board for repairs to Hypalon inflatble boats. Contains 70ml tube of Hypalon adhesive, 35 x 15cm of Hypalon material, abrasive paper and instructions. Available in Grey, White, Orange or Black PLEASE NOTE:- For a permanant repair 2 part adhesive must be used.

Polymarine Inflatable Boat Finish A finishing Product specifically for use on inflatable boats. Suitable for both PVC and Hypalon fabrics. Easy to apply with a soft cloth, no polishing required. Dries to a pleasant sheen. Helps to prevent resoiling. Contains no sillicones or distillants. Prevents fading and brightens colours.

Flexible repair sealant and adhesive for a waterproof permanant repair to coated fabrics, PVC, PU, neoprene, rubber, leather, most plastics and fabrics. Multiple uses including repairs to inflatable boat and RIB tubes, wet suits, dry suits, waders, boat fenders, tents and awnings, sails, diving and skiing equipment, foul weather gear, flotation vests, footwear, vinyl upholstery and thousands more items. Creates...

FiberFix Flex is an impregnated, rubberised fibreglass patch for permanent repairs on both flat and hard-to-wrap-around surfaces. Simply apply the patch over the hole and expose to sunlight or UV light. Flex patch will cure in 3-5 minutes. Three patches 3"x 3", 2"x 8" & 5"x 5" Properties Watertight & airtight Fits to any shape Sticks to almost...