Repair Kits & Adhesives: Page 2

Hypalon Two Part Glue 250ml, 500ml, 1 litre, 5 litre 25 litre

MEK Solvent 250ml, 500ml, 1 litre 5 litre

Professional permanent Repair Kit for all makes of Polyurethane Inflatable Dinghies & Rigid Inflatable Boats Everything you need in one watertight container to do a permanent repair, available in the following colours: Grey or Orange Watertight Container 250ml 2 part Hypalon Adhesive 125ml solvent Ethyl Acetate 37 x 15cm material Mixing Stick Mixing cup Application Brush Gloves Abrasive...

PVC Emergency Repair Kit

PVC Single Part Toluene Free Glue 70ml IBS PVC Single Part Toluene Free Adhesive has good resistance to fuel and water and is particularly suitable for bonding PVC and Polychloroprene coated fabrics For emergency repairs, as supplied in Emergency Repair Kit, for permanent repair use Two Pack Glue. Click download icon for Instructions, Safety Data Sheet Boat Fabric Type information Click accessories icon for solvents etc

Toluene Solvent for Hypalon 250ml, 500ml, 1 litre 5 litre

Zodiac Z7096 750ml PVC Two Part Adhesive Zodiac Two Part Glue is suitable for all PVC Inflatables Ribs Supplied with 3 x bottles of Curing Agent Zodiac Part nos: Z7096 For larger quantities see Bostik Vinycol 1520 ( 10 Litres) Bostik Demodur RC (800 grammes) part nos 502131 This is the same glue hardener as Zodiac Z7096

Fit these plugs into your kayak scupper holes to prevent water from entering the kayak cockpit. Easy to remove if necessary using the attached pull cord. Size: Small 1.25" - 1.5" Colour: Yellow Supplied as a pair with retaining cord

Repair kit for emergency repairs, which is supplied in hard waterproof container with tamper proof lid. A handy item to keep on board for repairs to PVC inflatble boats. Contains 70ml tube of PVC adhesive, 35 x 15cm of PVC material and instructions. PLEASE NOTE:- For a Permanent Repair, Polymarine 2 part Adhesive must be used. Available in Grey, White, Black or Orange

PVC Adhesive 2 part 250ml tin with 10ml curing agent. Solvent based polyurathene giving excellent adhesion to both plasticised and unplasticised PVC. Will bond a variety of surfaces including wood, canvas, leather, PVC, nylon fabric, polyurathene fabric and foam. Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex". Used by liferaft...

Polymarine 2903 Inflatable Boat Solvent Primer & Cleaner For Priming and Cleaning both PVC and Hypalon Inflatable Boat Fabrics. A primer to degrease and prepare surfaces before adhering Use sparingly with a soft cloth, evaporates quickly Suitable for reactivating applied adhesive Contains Butanone (MEK) Suitable for cleaning brushes 500ml can size

Hypalon Adhesive 2 part 250ml tin with 10ml curing agent. Solvent based polyurethene giving excellent adhesion to both plasticised and unplasticised PVC. Will bond a variety of surfaces including wood, canvas, leather, nylon fabric, polyurethene fabric and foam. Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex". Used by liferaft...

An easy to use boat cleaner specifically formulated for use on inflatable boats. Suitable for both PVC and Hypalon. Removes dirt, white oxidation, grease, oil and petrol deposits. Biodegradable. 500ml spray trigger bottle.

Inflatable Boat GRP Polish Wipe on Polish and wipe off. Gently buffs and polishes to a brilliant shine without scratching. Totally safe on all marine materials. Supplied in 250ml flip top bottle

The instant repair for all makes of Rib's, inflatables and liferafts. The patented 'ClamSeal' is a compact safety device, which can be quickly inserted into any tear in a tube or fabric floor up to 90mm [3.5 inches]. Hand tighten the nut is all that is needed before reinflating the tube for an instant repair above or below the waterline. Giving you ample time before a permanent repair can be carried...