Grid
List
Victron Energy Galvanic Isolator VDI-64
The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.
Victron Energy LYN034160200 Lynx Smart BMS 500
The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option.
Victron Energy LYN060102000 Lynx Distributor
A modular DC busbar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system.
Victron Energy ORI303050000 50A Buck-Boost DC/DC Converter
The Buck-Boost DC-DC Converter is a DC-DC converter for charging a 12/24V service battery with an intelligent dynamo. Since, when the engine is running, these dynamos (powered by the on-board electronics of Euro 5 and 6 engines) do not always emit the correct charging current, a DC-DC converter is essential for charging the service battery properly.
Victron Energy Smart Battery Protect 12/24V - 65A
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
Victron Energy Smart Battery Protect 48V - 100A
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
Victron Energy Smart Battery Sense - 10M Long Range Sensor for MPPTs
Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers. With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life.
Victron Filax 2 Transfer Switch CE 230V/50Hz-240V/60Hz
Filax: the ultra-fast transfer switch.The Filax has been designed to switch sensitive loads, such as computers or modern entertainment equipment from one AC source to another.
Victron Fuse Holder for Mega Fuse
MEGA-fuse holder, Holds all Victron MEGA-fuses.
Victron Galvanic Isolator VDI-16
Max current: 16A (@ 230v). Peak Current: 1600A / 20ms. Connections: 2 studs M6. Anodized Aluminium Heat Sink. Protection: IP67. Dimensions (HxWxD): 60 x 120 x 200 mm. Weight: 1kg.
Victron Galvanic Isolator VDI-32A
The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.
Victron GX Touch 50 Display
The GX Touch 50 is the display accessory for the Cerbo GX. The five inch a touch screen display gives an instant overview of your system and allows to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, its super slim waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard.
Victron GX Touch 70 Display
The GX Touch 70 is a display accessories for the Cerbo GX. The large screen display gives an instant overview of the system and allows the user to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, the super slim waterproof design, top-mountable setup and simple installation bring alot of flexibility when creating a crisp and clean dashboard.
Victron Interface MK2 - USB
Victron Energy MK2 interface module to connect PC to Phoenix. For use with v18 software and Phoenix chargers only.
Victron Interface MK3-USB (VE.Bus)
The MK3-USB allows a wide range of Victron products to connect to a computer for configuration and firmware updates. Â
Victron Inverting Remote On-Off Cable
Use this cable to connect the Phoenix Inverter 12/180, 24/180, 12/350 or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that features a load output.
Victron Isolation Tr. 2000W 115/230V
Indispensable in professional marine energy systems. It prevents electrolytic corrosion and above all serves as a device to guarantee a safe electric system. Toroidal wound technology for quietness and high efficiency. Soft start circuitry will ensure that the shore circuit breaker will not trip when plugged in.
Victron Isolation Tr. 3600W Auto 115/230V
Victron Auto 115/230V Isolation 3600W transformer.
Victron Isolation Transformer 3600W
Input: 115 or 230V. Output: 115 or 230V . Frequency: 50/60Hz. Rating: 32 / 16 A. Soft start. Transformer type: Toroidal (low noise, low weight). Input circuit breaker. Dimensions (HxWxD): 36.2 x 25.8 x 21.8 cm. Weight: 23 kg. Can be used as: 115V to 115V, 115V to 230V, 230V to 230V or 230V to 115V isolation transformer.
Victron Isolation Transformer 7000W
The isolation transformer eliminates any electrical continuity between AC shore power and the boat. It is essential for safety and eliminates the need for galvanic isolators and polarity alarms.
Victron Lynx Power In
A modular DC bus bar, used to connect batteries to the Lynx DC distribution system.
Victron Lynx Shunt VE Can
The Lynx Shunt VE.Can is an intelligent 1000A shunt with location for a fuse (not included), the built in battery monitor accurately monitors the state of charge of your battery. Use the Color Control GX for reading out the information. Part of the modular Lynx distribution system.
Victron Lynx Smart BMS 1000 (M10)
The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. It is available in two versions: 500A (with M8 busbar connections) and 1000A (with M10 busbar connections).
Victron M8 Circular Connector Male / Female 3 Pole Cable - 2m (2 Pack)
M8 circular connector Male/Female 3 pole cable 2m (Pack of 2) Extends the data cables that run from a 12.8 Volt Victron Smart Lithium Ion battery to the BMS
Victron M8 Circular Connector Male / Female 3 Pole Cable - 5m (2 Pack)
M8 circular connector Male/Female 3 pole cable 5m (Pack of 2) Extends the data cables that run from a 12.8 Volt Victron Smart Lithium Ion battery to the BMS
Victron MEGA-fuse 100A/32V (pack of 5)
Victron Energy MEGA-fuse 100A/32V MPN: CIP136100010 Pack of 5 fuses
Victron Mega-Fuse 125A/58V (1 Piece)
Victron MEGA-Fuse 125A/58V for 48V products (1 pc)
Victron MEGA-fuse 175A/32V (pack of 5)
Victron Energy MEGA-fuse 175A/32V MPN: CIP136175010 Pack of 5 fuses
Victron MEGA-fuse 200A/32V (pack of 5)
Victron Energy MEGA-fuse 200A/32V MPN: CIP136200010 Pack of 5 fuses
Victron Mega-Fuse 200A/58V (1 Piece)
Victron MEGA-Fuse 200A/58V for 48V products (1 pc)
Victron MEGA-fuse 250A/32V (pack of 5)
Victron Energy MEGA-fuse 250A/32V MPN: CIP136250010 Pack of 5 fuses
Victron MEGA-fuse 60A/32V (pack of 5)
Victron Energy MEGA-fuse 60A/32V MPN: CIP136060010 Pack of 5 fuses
Victron MEGA-fuse 80A/32V (pack of 5)
Victron Energy MEGA-fuse 80A/32V MPN: CIP136080010 Pack of 5 fuses
Victron MIDI-fuse 100A/32V (Pack of 5)
100A / 32V Victron MIDI-fuse. Supplied as a pack of 5.
Victron MIDI-fuse 200A/32V (pack of 5)
200A / 32V Victron MIDI-fuse. Supplied as a pack of 5.
Victron MIDI-fuse 60A/58V for 48V products
60A / 58V Victron MIDI-fuse. Supplied individually.
Victron MPPT Control
The MPPT Control lets you see the status as well as setup all BlueSolar MPPT Charge Controllers that have a VE.Direct communications port. The new MPPT Control is mounted in the familiar BMV-700 series housing, maintaining a consistent and professional look to your panels and systems monitoring equipment. Connect the MPPT Control to the BlueSolar MPPT Charge Controller with a VE.Direct cable. Note that this cable is not included and needs to be purchased separately.
Victron MultiPlus 12/2000/80-50 120V VE.Bus (UL)
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
Victron MultiPlus Compact - C 24V/1200W/25-16
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
Victron MultiPlus Compact - C 12V/1200W/50-16
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
Victron MultiPlus Compact - C 12V/1600W/70-16
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
Victron MultiPlus Compact - C 12V/2000W/80-30
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
Victron Orion 12/12-9A 110w DC-DC
Input voltage range: 8-17 V. Under voltage shut down / restart: 7 V / 7,5 V. Nominal output voltage: 12,2 V. Output voltage adjust range: 10-15 V. Output voltage tolerance: +/- 0,2 V. Output noise: 2 mV rms. Cont. output current at nominal output voltage and 25°C: 9 A. Maximum output current (10 s) at nominal output voltage: 12,5 A. Short circuit output current: 32 A. Cont. output power at 25°C / 40°C: 110 W / 85 W.
Victron Orion DC-DC Converter 12/24-10
Input voltage range: 9-18 V. Under voltage shutdown / restart: 8V / 10V. Output voltage: Adjustable (with potentiometer) 20–30V F set 26,4V V. Efficiency: 95%. Suitable to buffer-charge a battery. Continuous / Max output current: 10A / 20A. Off load current: Operating temperature range (derate 3% per °C above 40°C): -20 to +55°C. DC connection: Faston tabs 6.3 mm. Other features include ability to be connected in parallel.
Victron Orion DC-DC Converter 12/24-20
Input voltage range: 9-18 V. Under voltage shutdown / restart: 8V / 10V. Output voltage: Adjustable (with potentiometer) 20–30V F set 26,4V V. Efficiency: 93%. Suitable to buffer-charge a battery. Continuous / Max output current: 20A / 30A. Off load current: Operating temperature range (derate 3% per °C above 40°C): -20 to +55°C. DC connection: M6 Bolts. Other features include Fan assisted cooling (temp. controlled), Remote on-off, Can be connected in parallel.
Victron Orion DC-DC Converter 12/24-8
Input voltage range: 9-18 V. Under voltage shutdown / restart: 8V / 10V. Output voltage: 24 V. Efficiency: 95%. Continuous output current: 8 A. Max. Output current: 20 A. Off load current: Operating temperature range (derate 3% per °C above 40°C): -20 to +55°C. DC connection: Faston tabs 6.3 mm.
Victron Orion DC-DC Converter 24/12-25
Input voltage range: 18-35 V. Under voltage shutdown / restart: 14V / 18V. Output voltage: Adjustable (with potentiometer) 10–15V F set 13,2V V. Efficiency: 96%. Suitable to buffer-charge a battery. Continuous / Max output current: 25A / 35A. Off load current: Operating temperature range (derate 3% per °C above 40°C): -20 to +55°C. DC connection: Faston tabs 6.3 mm. Other features include Remote on-off, Can be connected in parallel.
Victron Orion DC-DC Converter 24/12-40A
Need help with choosing which Orion-TR DC-DC Converter is best for you? Click here to download an information sheet on available models.