Best Selling

The Digital Multi Control Panel GX is the same as the previous version, but with a new design. An extra advantage of this panel is the easy mounting: the included mounting frame allows the user to mount the panel from either front or back side. Due to the mounting frame, the mounting holes will no longer be in sight. The body of the GX panel is made of plastic, which makes the panel lighter and adds a modern look to the panel.

Prioritizes battery charging by the MPPT charge controller. Connects to the internet, enabling remote monitoring (VRM website) and remote control. The AC distribution consists of a RCD (30mA / 63A) and four AC outputs protected by two 10A and two 16A circuit breakers. An additional 16A output is controlled by the AC input: it will switch on only when AC is available. Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications.

The Battery Alarm is a small and low cost alarm panel which monitors your battery bank. It features both audible and visual alarms, as well as a potential free contact with normally open and normally closed contacts. Alarm thresholds and hysteresis are programmable by DIP switches.

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option.

The Buck-Boost DC-DC Converter is a DC-DC converter for charging a 12/24V service battery with an intelligent dynamo. Since, when the engine is running, these dynamos (powered by the on-board electronics of Euro 5 and 6 engines) do not always emit the correct charging current, a DC-DC converter is essential for charging the service battery properly.

The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers. With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life.

MEGA-fuse holder, Holds all Victron MEGA-fuses.

The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.

The GX Touch 70 is a display accessories for the Cerbo GX. The large screen display gives an instant overview of the system and allows the user to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, the super slim waterproof design, top-mountable setup and simple installation bring alot of flexibility when creating a crisp and clean dashboard.

The MK3-USB allows a wide range of Victron products to connect to a computer for configuration and firmware updates.  

Indispensable in professional marine energy systems. It prevents electrolytic corrosion and above all serves as a device to guarantee a safe electric system. Toroidal wound technology for quietness and high efficiency. Soft start circuitry will ensure that the shore circuit breaker will not trip when plugged in.

Input: 115 or 230V. Output: 115 or 230V . Frequency: 50/60Hz. Rating: 32 / 16 A. Soft start. Transformer type: Toroidal (low noise, low weight). Input circuit breaker. Dimensions (HxWxD): 36.2 x 25.8 x 21.8 cm. Weight: 23 kg. Can be used as: 115V to 115V, 115V to 230V, 230V to 230V or 230V to 115V isolation transformer.

A modular DC bus bar, used to connect batteries to the Lynx DC distribution system.

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. It is available in two versions: 500A (with M8 busbar connections) and 1000A (with M10 busbar connections).

M8 circular connector Male/Female 3 pole cable 5m (Pack of 2) Extends the data cables that run from a 12.8 Volt Victron Smart Lithium Ion battery to the BMS

Victron MEGA-Fuse 125A/58V for 48V products (1 pc)

Victron Energy MEGA-fuse 200A/32V MPN: CIP136200010 Pack of 5 fuses

Victron Energy MEGA-fuse 250A/32V MPN: CIP136250010 Pack of 5 fuses

Victron Energy MEGA-fuse 80A/32V MPN: CIP136080010 Pack of 5 fuses

200A / 32V Victron MIDI-fuse. Supplied as a pack of 5.

Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

Features includes Parallel and 3-phase operation, PowerControl, Power Assist, Remote on-off, VE.Bus communication port, General purpose com. Port, Battery temperature sensor & Programmable relay. Input voltage range 9.5 - 17 V DC. Output voltage: 230 VAC ± 2% / Frequency: 50 Hz ± 0,1%. Cont. output power at 25 °C: 3000 VA. Cont. output power at 25 °C / 40 °C: 2500 W / 2200 W. Peak power: 6000 W. Zero load power in Standard / AES mode / Search mode: 15 W / 10 W / 5 W. AC Input voltage range: 187-265 VAC / Input frequency: 45 – 65 Hz / Power factor: 1. Charge voltage 'absorption' / 'float': 14.4 / 28.8 V DC. Protection: output short circuit, overload, battery voltage too high/too low, temperature too high, 230 VAC on inverter output, input voltage ripple too high.