Transducers: Page 3

Raymarine’s RV-200 Bronze All-In-One Through Hull Transducer is designed for inboard and outboard powerboats. The RV-200 lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-200 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. 0° Element angle for Hull deadrises between 0° - 5°

Designed for inboard or outboard boats, the RV-312 Plastic Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. 10° Element angle for Hull deadrises between 5° - 15°

Raymarine’s RVM-100 all-in-one transom mount transducer is designed for Raymarine RealVision MAX compatible sonar modules, and RealVision MAX equipped chartplotters.

The RVM1600 for Axiom chartplotters takes multi-channel fish finder performance to new depths. The next generation of CHIRP DownVision, SideVision, 3D, and traditional CHIRP sonar, RealVision MAX fish finder technology delivers more power and life-like fish finder imagery.  

Spacer Kit for Jack Plate Mount for RV-100 RealVision 3D transom Mount Transducer.

GT8HW-IH transducer is ideal for bass boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It requires a flat section (

Connect a Garmin GT30 transom mount scanning transducer and a Garmin GT8HW-IH, GT15M-IH, Airmar P72 or Airmar P79 in-hull mount traditional transducer to a compatible ECHOMAP Plus™, echoMAP CHIRP chartplotter/sonar combo or a GPSMAP 10X2xsv/12X2xsv chartplotter.

Garmin 3m Transducer Extension Cable 12pin With XID.

Use this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device.

This dual beam transducer replaces the one included with your echo series fishfinder. A 500 W 4-pin transducer; an operating frequency of 77 to 200 kHz; a beamwidth of 45 to 15 degrees; and mounts on a 0 to 70 degree transom. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Connect a 4-pin transducer to a 12-pin sonar port on your compatible marine device with this adapter cable.

This plastic transom mount can be used to replace the dual frequency transducers included with many Garmin units.

Garmin 8Pin Female to Wire Block Adapter.

10' (3M) 8 Pin heavy duty extension cable for the GT12M-THF or GT15M-THF Transducers.

Garmin 10ft Xdcr Extension Cable 8 Pin.

Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.

Garmin 6Pin Female to 8Pin Male Adapter.

This entry level CHIRP solution provides good depth capability and target separation.

This entry level CHIRP solution provides good depth capability and target separation. This 8-pin 300 W bronze thru-hull mount transducer has a depth of 1,500 ft; an operating frequency of 95-155 kHz; a beamwidth of 26/17 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum flexibility for the choice of frequencies. An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 1,200 ft; an operating frequency of 130-210 kHz; a beamwidth of 9-15 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

This mid-range 1 kW 8-pin transducer with a narrow beam is good for deep water and bottom definition. It has a depth of 1,500 to 2,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 14x23 to 3x5 degrees; and a 0 to 26 degree deadrise.

This bronze thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls. This 8-pin 500 W transducer has a depth of 900 ft; an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. *Do not use on metal hulls.

Garmin 010-11634-22 Airmar B75H Bronze Thru-Hull Transducer with Garmin 8 Pin Connector 20° Tilted version for 16°-24° deadrise Our bronze thru-hull mount transducer is designed to allow both traditional and spread spectrum scanning when used with a compatible sonar. A 600 W transducer with 8 pins, it has a depth of 800 ft; an operating frequency of 130-210 kHz; a beamwidth of 15/9 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat

Garmin 010-11105-00 Airmar DT800 Smart Sensor 20 Degree 20° Tilted version for 16° - 24° hull deadrise The DT800 utilizes Airmar’s proven Tilted Element and broadband technologies in this thru-hull depth and temperature Smart Sensor. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA2000 display or network. Airmar's Smart Sensors have embedded microelectronics - the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible network or display.