Transducers: Page 2

Specialized dual-channel CHIRP transducers that incorporate a conical beam for fish targeting and an ultra wide fan shaped beam for photo-like DownVision sonar images. CHIRP DownVision transducers are available in both transom and thru-hull configurations. CPT-110 plastic ThruHull CHIRP DownVision transducer 10m cable inc Fairing block. Direct connect to CP100 and A68, A78, A98, 128,...

Raymarine's exclusive line of DownVision transducers pair a conical CHIRP fishfinding element with a wide beam DownVision element. The result is an unrivalled level of subsurface visibility.

Transducer, Depth & Temp, Dragonfly only (10m cable)

CPT-S bronze through hull 12 deg angled element CHIRP sonar transducer. Direct connect to CP100 and a68, a78, 98, 128, eS78, eS98, eS128 Multifunction Displays giving you CHIRP quality sonar 2D image.

Bronze Through Hull Angled Element CHIRP Sonar Transducer. 20° version for boats with 15° - 25° deadrise Compatible with Axiom, a series and eS series (Sonar enabled models).

CPT-S Plastic Conical High Chirp Through Hull 12 Degree Transducer

The CPT-S In-hull transducer provides a simple-to-install depth only transducer solution for non-cored fiberglass hulls. Ideal for sailing, cruising, and small powerboat applications, the CPTS-S In-hull transducer supports CHIRP operation centered on 200kHz. The CPT-S in-hull directly connects to Element S and connects to Axiom RV, Axiom Pro, and Element HV using the A80490 or A80559 adapters, respectively. An innovative transducer tube housing design allows the CPT-S In-Hull to mount in hulls ranging from 0 to 25 degrees deadrise.

Plastic Thru-Hull 12° Angled Element CHIRP Sonar Transducer. 12° Element for 7-17° Deadrise Compatible with Axiom, a series and eS series (Sonar enabled models).

Plastic Transom Mount CPT-S Transducer for transom angles 0° - 90° Compatible with Axiom, a series and eS series (Sonar enabled models).

Compatible w/ Raymarine C-Series and E-Series Displays.

HV-100 Transom Transducer Bracket

HV-100+ HyperVision Plastic Transom Transducer with 6m cable. (Replaces 705-A80603)

The all-in-one design of Element's HyperVision transducers make them compact and easy to install. Raymarine offers convenient transom mount and thru-hull options to fit any boat.

 HyperVision Transducer Extension Cable 4M

P120-ST800 Plastic Low Profile Thru Hull Speed and Temp Transducer

Compatible hull material: fiberglass and metal. Depth only. Max Power: 600 watts. Frequency: 200/50 KHZ . Cable: 9.1m/30ft with connector. Hole diameter for installation: 2".

Compatible hull material: fiberglass. Max Power: 500W RMS (depending on connected SONAR). Frequency: 200/50 KHZ . Depth only. . Easily adjusts to any deadrise angle up to 22° . Transmits sound waves directly at the bottom so strong echoes are reflected back to the transducer . Can be removed in seconds for servicing or storage . Only the base piece is bonded to the hull. There is no adhesive layer under the transducer face to absorb sound energy . Simplifies in-hull installation .

Designed for inboard or outboard boats, the RV-220 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-220 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. 20° Element angle for Hull deadrises between 15° - 25°

Designed for inboard or outboard boats, the RV-412 stainless steel through hull transducer system lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-412 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. 10° Element angle for Hull deadrises between 5° - 15°

RVM-400 series stainless steel all-in-one through hull transducer brings the power and clarity of RealVision MAX technology to inboard and outboard powerboats. The RVM-400 series transducers are compatible with the RVM1600 sonar module and Axiom 2 Pro RVM chartplotters. The RVM-412 is a port and starboard transducer pair designed for boats with 5° to 15° of deadrise. Each transducer element is tilted at 12° to compensate for the hull deadrise.

The all-in-one design of Element's HyperVision transducers make them compact and easy to install. Raymarine offers convenient transom mount and thru-hull options to fit any boat.

With 16 internal ceramics the R109 is a powerhouse transducer. The thru-hull design ensure maximum performance by putting nothing between the transducer and the water.

The RS150 GPS is a high performance, 72-channel, remotely mounted GPS sensor for Raymarine navigation systems. The RS150 offers fast 10Hz position updates and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system.

Transom Mounting bracket for Raymarine RV-100 Transducer.