Grid
List
Garmin Rudder Feedback Extension Cable - 5m
Add 5 m (16.4 feet) of additional length to connect a GRF™ 10 rudder feedback sensor to a GHP™ 12 or 20.
Garmin Safety Related Message (SRM) Cable for AIS 600
This SRM (safety related message) cable allows users to initiate a "safety related message" transmission. It also allows users to switch the device into Receive Only mode.
Garmin Solenoid Power Cable
This power cable integrates protection diodes and self-healing fuses to protect your ECU from hazardous voltages generated by hydraulic solenoid coils when used in a solenoid configuration. For use with the GHP Reactor Mechanical/Solenoid/Retrofit corepack.
Garmin Striker Plus / Vivid 4" Protective Cover
Use this cover to protect your compatible 4" STRIKER Plus / Vivid from the harsh marine environment when not in use.
Garmin TD 50 5" Touchscreen Display
The Garmin TD 50 provides an extra touchscreen to easily connect with the boats systems, sensors and media for supplementary control, switching, and data monitoring from virtually any suitable mounting location on board.
Garmin Threaded Collar CCU Extension Cable - 15m
CCU Extenstion Cable with Threaded Collar - 15m
Garmin Threaded Collar CCU Extension Cable - 16.4ft (5m)
Garmin GHP Autopilot Course Computer Unit (CCU) Extension Cable.
Garmin Threaded Power Cable - 90 Degree Connector
Power and connect your compatible GPSMAP® device with this 6-foot, 2-pin power cable.
Garmin Threaded Power Cable - Straight Connector
Power your multi-function display (MFD) with this 6 ft (1.8 m) power cable. Separate locking O-ring allows you to thread/install the cable through smaller holes drilled into the boat. Once installed, the locking ring connects to the plug.
Garmin Threaded Video Cable
Compatible with: GPSMAP 6008 GPSMAP 6012 GPSMAP 7012 GPSMAP 7015
Garmin Transducer Adapter Cable (P72/P79/GT30) for echoMap
This adapter cable allows the Garmin echoMAP to continue to display water depth from the in-hull transducer in instances when the transom mount transducer loses depth reading due to cavitation.
Garmin Transducer Block Connector to 12 Pin Sounder Cable
Connect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter.
Garmin USB / Charger Cable for Quatix 3 Watch
Clip your compatible wrist-worn device into the cradle and use the attached USB interface to plug into your computer or power adapter to recharge the battery. It can also be used to transfer waypoints, routes and tracks between the device and your computer.
Garmin USB Cable
USB A to USB Mini Cable. Create routes and waypoints on your personal computer and transfer them to your device. On compatible devices, use the mini USB cable to transfer photos and music and turn your device into a portable photo album or music player. Can also provide external power for compatible devices.
Garmin USB Cable - Type A to Mini USB
Get the most out of your device with our USB cable. Create routes and waypoints on your personal computer and transfer them to your device using the USB cable. On compatible devices, use the USB cable to transfer photos and music and turn your device into a portable photo album or music player. You can even use the USB cable to charge your device!.
Garmin USB Cable Type A to Type C - 1m
Connect this cable to a USB A port to recharge your compatible device and to transfer data to and from your computer.
Garmin USB Power Cable
Garmin USB Power cable for portable devices, The cable has an input voltage of 8 V to 58 V and an output of 5 V at 500 mA.
Garmin USB Smart Watch Charging/Data Cable
Complete 2 tasks with 1 cable using our charging/data clip. Connect the cable to your computer's USB port to recharge your compatible device and to transfer data to and from your computer. This cable also pairs with an optional AC adapter (sold separately).
Garmin User Data Sharing Cable
Share user data such as waypoints and routes with other compatible Garmin devices.
Garmin VHF Interconnect Cable for AIS 300/600 - 4.5m
VHF Interconnect Cable for the Garmin AIS600
Garmin VHF Interconnect Cable for AIS 800
Easily connect your VHF radio to your compatible AIS using our VHF interconnect cable.
Garmin Video Extension Cable - 49.21ft (15m)
Compatible with the Garmin GC 10 Camera Cable length: 15m (49.2') Connect to the GC™ 10 camera for 15 m (49.21 feet) of extra cable length.
Garmin Video Extension Cable for GC14 Camera - 15m
Get an extra 15 meters (49.21 feet) of length when using this cable with a GC12 or GC14 camera. This cable has male connectors on both ends.
Garmin Yamaha Engine Bus to J1939 Adapter Cable
Connect your J1939 equipped GPSMAP® series chartplotter directly to your Yamaha engine bus multi-hub to bring Yamaha’s custom touchscreen engine interface to your Garmin installation.
AXIOM2 Pro & XL Power Cable, Right Angled 1.5M
AXIOM2 Pro & XL Power Cable,
Right Angled 1.5M opr straight
Axiom2 XL - Silicon Magnetic Suncover
Raymarine have designed new magnetic sun covers to suit the Axiom XL range of multifunction displays.
Available to fit the 16, 19, 22 and 24-inch display sizes.
CPT-S Bronze Conical HIGH CHIRP Through Hull Angled Element Transducer, 10m
CPT-S Bronze Conical High Chirp Through Hull Degree Angled Transducer
Raymarine 10m Digital Radar Extension Cable
10m Digital Radar extension cable for digital radomes and HD/SHD digital open arrays.
Raymarine 25m Digital Radar Cable with Raynet Connector
25m Digital Radar Scanner Cable fitted with RayNet Connector.
Raymarine 3 Way SeaTalk 1 Junction Block
3 Way SeaTalk 1 Junction Block
Raymarine Adapter Cable 25pin to 9pin
Adaptor Cable (25 pin to 9 pin) attach DownVision (CPT-1xx) transducer to Axiom RV.
Raymarine Adapter Cable for CPT-S/DVS (9-pin) to Element HV (15-pin)
Raymarine Adapter Cable for CPT-S/DVS (9-pin) to Element HV (15-pin)
Raymarine Adapter Cable for CPT-S/DVS (9-pin) to Element HV (15-pin)
Raymarine Adapter Cable for CPT-S/DVS to Element HV
Raymarine Adapter Cable for CPT-S/DVS (9-pin) to Element HV (15-pin)
Raymarine Adapter Cable for Dragonfly Green Connector (10-pin) to Element HV (15-pin)
Raymarine Adapter Cable for Dragonfly Green Connector (10-pin) to Element HV (15-pin)
Raymarine Adapter Cable for Dragonfly to Element HV
Raymarine Adapter Cable for Dragonfly Green Connector (10-pin) to Element HV (15-pin)
Raymarine Adapter Cable for MinnKota Transducer to Element HV
Raymarine Adapter Cable for MinnKota Transducer to Element HV (15-pin)
Raymarine Adapter Cable for MinnKota Transducer to Element HV - 15-Pin
Raymarine Adapter Cable for MinnKota Transducer to Element HV - 15-Pin
Raymarine Adapter Cable for MotorGuide Transducer to Element HV
Raymarine Adapter Cable for MotorGuide Transducer to Element HV (15-pin)
Raymarine Adapter Plate E120 to Axiom Pro 12
Black Powder coated to match the Axiom"," this adapter plate is designed to enable a simple and stylish installation of Axiom Pro 12" multifunction displays in place of a E120 Display.
Raymarine Adapter Plate to Fit Axiom 12 Into C120/E120 Classic Size Cutout
The Axiom 12 adapter plate is used when replacing an existing legacy C120 or E120 Classic Multifunction Display with an Axion 12 or Axion 12 RV uses existing fixing holes.
Raymarine Adapter Plate to fit Axiom 9 into a9 size cutout
The Axiom 9 adapter plate is used when replacing an existing legacy a95, a97 or a98 Touch Screen Multifunction Display with an Axiom 9 or Axiom 9 RV uses existing fixing holes.
Raymarine Adapter Plate to fit Axiom 9 into C70 size cutout
The Axiom 9 adapter plate is used when replacing an existing legacy C70 Classic Multifunction Display with an Axiom 9 or Axiom 9 RV requires new fixing holes.
Raymarine Adapter Plate to fit Axiom 9 into C80 or E80
Raymarine adaptor plate to allow the fitting of an Axiom 9 into a C80 / E80 sized cutout.#html-body [data-pb-style=""63907256B0DCF""]{justify-content: flex-start; display: flex; flex-direction: column; background-position: left top; background-size: cover; background-repeat: no-repeat; background-attachment: scroll; border-style: none; border-width: 1px; border-radius: 0px; margin: 0px 0px 10px; padding:...
Raymarine Adaptor Cable (9 pin to 7 pin) to attach an existing 7 pin Airmar (direct connect to ax7/e
Adaptor Cable (9 pin to 7 pin) to attach an existing 7 pin Airmar (direct connect to ax7/eSx7 MFD) transducer to Axiom 7DV.
Raymarine Adaptor Cable 25 pin to 7 pin
Adaptor Cable (25 pin to 7 pin) to attach an existing 7 pin Airmar (direct connect to ax7/eSx7 MFD) transducer to Axiom RV.
Raymarine Adaptor Cable 9-7Pin Axiom 7DV
Adaptor Cable (9 pin to 7 pin) to attach an existing 7 pin Airmar (direct connect to ax7/eSx7 MFD) transducer to Axiom 7DV.
Raymarine Adaptor Plate To Fit Axiom 7 Into e7 Size Cutout
Raymarine Adaptor Plate To Fit Axiom 7 Into e7 Size Cutout .