Cables & Accessories: Page 3

The RayNet (M) to RayNet (M) Cable Joiner adapter lets you connect two standard RayNet networking cables together in instances where you need to extend the length of a cable run. .

The Raymarine A80247 Raynet to RJ45 Female Adapter has an RJ45 Female Gland connector at one end, and a RayNet Female connector at the other end. The Gland makes the RJ45 Female socket watertight. This cable would typically be used to convert an RJ45 Digital Radar Cable to a RayNet Radar Cable, allowing you to connect the cable directly into the back of an ace or gS Series multifunction display, or...

TA104 Hull / NMEA Connector Kit

SeaTalk ng Extender - Connects two backbone cables. Used for extending blue SeaTalk ng Backbone Cables. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s...

This cable has an NMEA 2000 micro-C female connector on one end, to connect to the NMEA2000 device and a SeatalkNG white spur connector to plug into a T on the SeatalkNG backbone. For example, if you want to connect a LCJ Baroplug to a Raymarine system, this is what you would use.

ST1 Adaptor Cable (3 Pin) - 15.7in (0.4m).

Raymarine’s proprietary network design released at the same time as NMEA0183 that had several key advantages. SeaTalk1 is included in many Raymarine MFDs and instruments to provide legacy support but now NMEA 2000 offers several advantages over SeaTalk1.

St30/40/60 Power Cord Flat. Part number D229.

Raymarine STng (M) to Devicenet (F) Adaptor.

The Raymarine SeaTalkng Alarm Buzzer is a network accessory that repeats alarm and alert tones from compatible networked devices ensuring alarms and alerts can be heard on-deck and below decks as needed.

Connect SeaTalkng and NMEA2000 backbones together with these backbone cable adapters. Female STNG to Male DeviceNet / NMEA 2000 Version (Female to Female) Version also available, see product: 705-A80675

SeaTalk ng Terminator - Fitted at each end of backbone, two are required per system. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range...

SeaTalk ng right angled adaptor used to connect spur cable to SeaTalk ng device when space behind is limited.

SeaTalk ng T-Piece - Connects spur to backbone. Used for connecting white SeaTalk ng Spur Cables to Blue SeaTalk ng Backbone Cables. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to...

STNG to Devicenet (Male) Adaptor Cable 1 meter.

ST1 Adaptor Cable (3 Pin) - 39.4in (1.0m).

Spur Cable - 19.68ft / 6m Individual devices connect to the SeaTalkNG backbone by spur cables that run to T-pieces on the backbone.

Raymarine’s proprietary cable system for use in NMEA 2000 networks. The design provides two advantages. First, the connector collars are retained on the product which allows for a smaller cable diameter making installations easier. More importantly, the cable can include a sixth wire which allows for backward compatibility with SeaTalk1 equipment. Products with SeaTalkng connectors can be used...