Grid
List
Garmin BlueNet 30 Gateway
The Garmin BlueNet 30 gateway is required for Garmin BlueNet network compatible devices to network with legacy Garmin marine devices. Through this gateway you can connect a Garmin BlueNet network to a legacy Garmin Marine Network for a premium control experience.
Garmin BlueNet Cable - 500'
The Garmin BlueNet network cables offer various lengths to help with installations. Various sizes sold separately. Consider purchasing the Field installable Adapter Kit for the Garmin BlueNet network if purchasing this 500-foot-long cable.
Garmin BlueNet Marine Network Cable - 6' 1.83M
The Garmin BlueNet marine network cables are available in a variety of cable lengths to help with installations.
Cable length: 6' (1.83m)
Garmin Field Installable gWind Connectors
Use these water resistant male/female field-installable connectors at the foot of the mast for easy connection of the mast cables on Garmin's gWind wind sensors when stepping the mast.
Garmin GBT 10 Trim Tab Analog to NMEA 2000 Adapter
With the GBT 10 Trim Tab Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and converts the data into a NMEA 2000® signal so you can create or expand your network without replacing all of the equipment on your boat.
Garmin GND 10 Black Box Nexus to NMEA 2000 Bridge
The GND 10 black box bridge seamlessly integrates Nexus instruments and sensors with the Garmin family. It converts data between the Nexus Network and NMEA 2000 to provide compatibility between Nexus and Garmin products, including gWind, gWind Wireless and gWind Race transducers. Simple plug-and-play installation between Nexus and NMEA 2000, with USB connectivity, eliminates the need for user setup...
Garmin Marine Network Cable POE Isolation Coupler
Connect a thermal camera, underwater lighting or boart stabilizing system to a compatible GPSMAP® series Garmin chartplotter with this PoE (Power over Ethernet) isolation coupler. The coupler provides connectivity to the Garmin Marine Network; without it the network will not function correctly and could possibly damage your Garmin unit and/or PoE device.
Garmin NMEA 2000 Backbone / Drop Cable 30 cm
Extend your NMEA 2000 backbone with the 1 ft. (0.3 m) backbone/drop cable.
Garmin NMEA 2000 Field-installable Connector - Female
Use the female NMEA 2000 field-installable connector to create custom-length drop cables and backbone extension cables.
Garmin NMEA 2000 Field-installable Connector - Male
Use the male NMEA 2000 field-installable connector to create custom-length drop cables and backbone extension cables.
Garmin NMEA 2000 Inline Terminator
Use the inline terminator between the backbone cable and your compatible device to correctly terminate the network.
Garmin NMEA 2000 Multi-Port T-Connector
Make NMEA 2000 installations easier with our multi-port T-connector. This solution creates a more robust NMEA 2000 backbone by reducing issues with breaking points as well as stress induced by long back bones. The rigid construction is less prone to failure and decreases installation time.
Garmin NMEA 2000 Power Isolator
The NMEA 2000 power isolator is useful to ensure proper installation of the NMEA 2000 network in separating different power sources that could power the bus. Some NMEA 2000 capable engines can potentially provide power to the NMEA 2000 bus. The NMEA 2000 power isolator is useful because it makes sure the NMEA 2000 power from the engines and system power are kept separate.
Garmin NMEA 2000 Starter Kit
Garmin's starter kit has everything you need to build a basic NMEA 2000 network on your boat. The kit includes an NMEA 2000 drop cable (2 m), backbone cable (6 m), power cable (2 m), 2 T-connectors, and male and female terminator connectors.
Garmin NMEA 2000 Terminator - Female
This standard female NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network.
Garmin NMEA 2000 Terminator - Male
This standard male NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network.
Garmin NMEA2000 1 Port T-Connector
Add components to any NMEA 2000 network by installing this T-connector on the backbone cable. The revised version of this T-connector is offset by 45 degrees compared to the previous version.
Garmin NMEA2000 Power Isolator
Use this power isolator to ensure sources that could power the bus are separated properly during installation of the NMEA 2000 network.
Garmin SteadyCast NMEA 2000 Heading Sensor
SteadyCast heading sensor is a simple, easy-to-install solution that provides fast calibration and premium heading accuracy. It aligns your boat bow to its actual orientation so you know where you are casting according to your chartplotter screen.
Garmin NMEA 2000 Tee Connector
Add components to your NMEA 2000 network by installing the T-connector on your backbone cable.
Raymarine (f) to RJ45 (M) cable
RayNet to RJ45 male cable.
Available in
Raymarine 12V Power Over Ethernet (POE) Injector
The power over ethernet injector used in the installation of T Series Joysticks
Raymarine 220mm (Ray63/73) Adaptor Cable
This cable allows a wireless handset hub to be connected to a Ray63 or Ray73
Raymarine 2m STNG bare wires for 0183
Raymarine 2m STNG bare wires for nmea 0183.
Raymarine 2m STNG R/A Power Cab Bare Wires
A right angle cable to connect a SeaTalkng backbone to a 12V switched power supply, or to connect power to an RMK-9.
The current marine industry standard. All current Raymarine MFDs are NMEA2000 certified. The standard utilizes the CAN (Control Area Network) design developed by Bosch for the automotive market but with messages/sentence appropriate for the marine industry. A multi-talker, multi-listener...
Raymarine 5 Way Connector
SeaTalk ng 5 Way Connector - Used for connecting spurs to the backbone. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable...
Raymarine 50m Mast Cable & Connector
Raymarine Wind Transducers 50m mast cable and connector.
Raymarine A06078 STNG (Female) to DeviceNet (Male) - 120mm
FeMale SeaTalkNG to Male Devicenet Cable - 120mm
Raymarine Backbone Cable
SeaTalk ng Backbone cable, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone.
The backbone carries both data and power to attached devices.
The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined...
Raymarine Blanking Plug
SeaTalk ng Blanking Plug - Inserted into unused spur connector positions in 5-way connector and T Piece. Place blanking plug in unused SeaTalkNG Spur sockets to protect them. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng.
Raymarine DeviceNet (Female) adaptor Cable (0.4m)
SeaTalk ng DeviceNet (female) adaptor cable - Spur to N2K Female. Adapts SeaTalk ng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 systems. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors...
Raymarine Devicenet (M) to STng (F) Adaptor 90d
Raymarine Devicenet (M) to STng (F) Adaptor 90d.
Raymarine DeviceNet (Male) adaptor Cable (1.5m)
SeaTalk ng DeviceNet (male) adaptor cable - Spur to N2K male. Adapts SeaTalk ng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 systems. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors...
Raymarine Devicenet Male to STNG Adaptor Cable
Raymarine Devicenet Male to STNG Adaptor Cable
Raymarine Devicenet(M) to Stng(F) Adaptor
Raymarine Devicenet(M) to Stng(F) Adaptor.
Raymarine E Series to Seatalk NG Adapter Cable
SeaTalk ng Adaptor Cable for E80 and E120 Classic Multifunction Displays
Raymarine Elbow to Straight Spur Cable 1m
90 degree Elbow to Straight Connector
Raymarine eS7 Video In / NMEA 0183 Cable
Video In / NMEA 0183 Cable for Raymarine eS7 Series MFD's.
Raymarine Extension Cable ST1
Pre-terminated SeaTalk Cable, for easy interlinking of SeaTalk instrument displays, autopilot displays, RL & C series displays and SeaTalk VHF's.
Raymarine External Alarm Buzzer
Compatible w/ Raymarine C-Series and E-Series Displays.
Raymarine In-Line STNG Terminator
Terminators go at each end of the Backbone. This is ideal for the RS130. Two Terminators are required per system.
Raymarine iTC-5 Instrument Transducer Converter Analogue Tx signals to SeaTalk ng
The iTC-5 will convert just about any Raymarine instrument analogue transducer signals and convert it into SeaTalk ng data.Transducers for Speed/Temperature, Depth, Wind and Rudder Angle can be connected to the ITC-5.
Transducers for Speed/Temperature, Depth, Wind and Rudder Angle can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods.
ITC-5 KEY FEATURES
Extended...
Raymarine RayNet (F) to STHS (M) Cable - 3m
RayNet female to SeaTalk HS male adaptor cable 3m.
Raymarine RayNet (Male) Right Angle Adaptor
Raymarine RayNet to Raynet right angle adaptor.
Raymarine Raynet Cable Pullers - 5 Pack
The Raymarine RayNet cable pullers are designed to securely attach to the twist lock plug on RayNet cables to provide a convenient point to attach a pull string for easy cable installation. Pack of 5.
Raymarine RayNet Female to RayNet Female
RayNet female to RayNet female cables used to connect RayNet devices together
Raymarine RayNet Male to RayNet Male cable - 100mm
The RayNet (M) to RayNet (M) Cable Joiner adapter lets you connect two standard RayNet networking cables together in instances where you need to extend the length of a cable run. .
Raymarine RayNet Male to STHS Male adaptor
RayNet (M) To STHS (M) Adapter 400mm Connect Classic or Wide to RayNet Radars.