All Electrical: Page 19

Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.

Parallel and 3-phase operation. Input voltage range (V DC) 9.5 - 17V / 19 - 33V / 38 - 66V. Output voltage: 230 VAC ±2% Frequency: 50 Hz ± 0,1% (1). Cont. output power at 25 ºC: 1600 VA / 1300 W. VE.Bus communication port for parallel and three phase operation, remote monitoring and system integration. Protection: Output short circuit; Overload; Battery voltage too high/too low; Temperature too high; 230 V AC on inverter output; Input voltage ripple too high. Dimensions (HxWxD): 37.5x21.4x11.0 cm / Weight: 10 kg.

Parallel and 3-phase operation. Input voltage range (V DC) 9.5 - 17V / 19 - 33V / 38 - 66V. Output voltage: 230 VAC ±2% Frequency: 50 Hz ± 0,1% (1). Cont. output power at 25 ºC: 1600 VA / 1300 W. VE.Bus communication port for parallel and three phase operation, remote monitoring and system integration. Protection: Output short circuit; Overload; Battery voltage too high/too low; Temperature too high; 230 V AC on inverter output; Input voltage ripple too high. Dimensions (HxWxD): 37.5x21.4x11.0 cm / Weight: 10 kg.

Panel is intended for remote on/off control of all the VE.Direct Phoenix inverter models. VE.Direct cable is not included 

The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA and 3000VA for 12, 24 or 48V systems.It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave. Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.

Plug 16A/250Vac (2p/3w) for Power Inlet 16A.

Polyamid inlet . Brass, Nickel plated Pins. Glass filled PA6 Cover. Current / Voltage Rating : 16A / 250VAC. IEC 60309, 2p+E Standard. CE certified & Waterproof IP56.

Stainless steel inlet . Brass, Nickel plated Pins. Solid cast 316 Stainless Steel Cover. Current / Voltage Rating : 32A / 250VAC. IEC 60309, 2p+E Standard. CE certified & Waterproof IP56.

Features includes Parallel and 3-phase operation, remote monitoring and system integration, PowerControl , PowerAssist , Integrated Transfer switch and battery temperature sensor. Input voltage range: 9.5 - 17V DC. Output voltage: 230 VAC ± 2% / Frequency: 50 Hz ± 0,1%. Cont. output power at 25 °C: 5000 VA. Cont. output power at 25 °C / 40 °C: 4500 W / 4000 W. Peak power: 10000 W. Zero-load power in Standard / AES mode / Search mode: 25 W / 20 W / 5 W. AC inputs (2x): Input voltage range: 187-265 VAC / Input frequency: 45 – 65 Hz / Power factor: 1. Charge voltage 'absorption' / 'float': 14,4 V DC / 13.8 V DC. Protection: output short circuit, overload, battery voltage too high/too low, temperature too high, 230 VAC on inverter output, input voltage ripple too high.

Features includes Parallel and 3-phase operation, remote monitoring and system integration, PowerControl , PowerAssist , Integrated Transfer switch and battery temperature sensor. Input voltage range: 19 - 33V DC. Output voltage: 230 VAC ± 2% / Frequency: 50 Hz ± 0,1%. Cont. output power at 25 °C: 8000 VA. Cont. output power at 25 °C / 40 °C: 7000 W / 6300 W. Peak power: 16000 W. Zero-load power in Standard / AES mode / Search mode: 30 W / 25 W / 8 W. AC inputs (2x): Input voltage range: 187-265 VAC / Input frequency: 45 – 65 Hz / Power factor: 1. Charge voltage 'absorption' / 'float': 28.8 V DC / 27.6 V DC. Protection: output short circuit, overload, battery voltage too high/too low, temperature too high, 230 VAC on inverter output, input voltage ripple too high.

This panel is intended for Phoenix Inverters equipped with a UTP remote monitoring and control socket. It can also be used on a MultiPlus Inverter/Charger when an automatic transfer switch but no charger function is desired. The brightness of the LEDs is automatically reduced during night time.  Note: Only for models: 12/1200, 12/1600, 12/2000, 12/3000, 12/5000, 24/1200, 24/1600, 24/2000, 24/3000, 24/5000, 48/3000 and 48/5000.

Victron energy UTP Patch Lead 0.3m.

Victron energy UTP Patch Lead 1.8m.

Victron energy UTP Patch Lead 10m.

Victron energy UTP Patch Lead 20m.

Victron energy UTP Patch Lead 5m.

CE certified shore power cable with moulded 3 pin plug and connector. Features a power indication LED and protective cap on female connector for additional safety.

Heavy duty shunt for measuring current up to 1000 Amps. This shunt can be used with any of the Victron BMV meters to increase the current range to 1000 Amps.

The Skylla Control allows you to alter the charge current and see the system status.

A modern and powerful battery charger that withstands the rigors of an adverse environment: heat, humidity and salt air.  The right amount of charge for a lead-acid battery: variable absorption time BatterySafe mode: preventing damage due to excessive gassing Storage mode: less maintenance and aging when the battery is not in use Smaller and lighter compared to similar models NMEA2000 Canbus connection PowerControl: set a maximum shore power Remote Control Li-ion (LiFePo4) ready

Features include: Temperature sensor, use as a power supply, forced cooling. Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN(long-range wide area network) device, available optionally. The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery. Charge voltage 'absorption' / 'float': 28.5 V DC / 26.5 V DC. Charge current: 30 A. Charge characteristic: IUoUo (three step). Protection: output short circuit, battery reverse polarity detection, battery voltage too high, temperature too high. Operating temp. range -20 to 60°C (0 - 140°F). Humidity (non condensing) max 95%. Protection category IP 21.

Features include: Temperature sensor, use as a power supply, forced cooling. Input voltage / input voltage range: 230 V AC / 90 - 265 V AC. Frequency: 45-65 Hz / Power factor: 1. Charge voltage 'absorption' / 'float': 28.5 V DC / 26.5 V DC. Battery capacity: 250-500 Ah. Protection: IP21 / Output short circuit, battery reverse polarity detection, battery voltage too high, temperature too high. Charge current starter batt. / house batt.: 4 A / 50 A. Charge characteristic: IUoUo (three step). Remote alarm: Potential free contacts 60V / 1A (1x NO and 1x NC). Operating temp. range / Humidity (non condensing): -20 to 60°C / max 95%.

The Smart BMS CL 12/100 is a Battery Management system for Victron lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator. The BMS CL 12/100 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low battery voltage, high battery voltage or over temperature.