Sterling Pro Charge Ultra 24V 30A (3 Output) Charger
login to saveProduct Description
Sterling Pro Charge Ultra 1230 Battery Charger is the latest in boat battery charging systems with plenty of well thought out useful features plus easy to install & wire up thanks to their simple output screw terminals. The chargers have 2 clear digital displays on the front which show information about the voltage and current supplies and a series of 32 LEDs also give plenty of information about your charging system.
It is generally recommended that a battery charger to be about 10% of the amp/hr capacity of the batteries requiring to be charged. However, if you have a generator set onboard and you wish to charge your batteries faster - ie, to save fuel, then depending on your budget, you can easily double the charger size to reduce your generator running hours and achieve the charge faster. The Pro Charge Ultra has 3 isolated charging outputs, 3 batteries or battery banks can charge without the batteries themselves being interconnected, e.g. starter, domestic and generator starter battery.
Standard features include:
- 11 pre-programmed battery charging curves - easy to select
- 1 custom set, can be set from charger, no need for computer
- 2 digital meters for current and voltage measurement
- 1 power meter to show what reserve power left on the unit
- Synchronised rectification output
- High voltage de-sulphation cycle
- Low activity, standby mode to increase battery life
- Battery health program
- Multi speed fan control to reduce unnecessary fan noise
- Primary (processor digitally controlled) & an emergency backup secondary (analogue controlled) high voltage trip
- 32 LED information panel
- Internal scan and systems check
- Includes battery temperature sensor
Size: L260xW215xD90mm
Weight: 2.0kg
Specifications
- Global Input Power - automatically operates with an A/C input of 90-270 volts at 40-70 Hz
- 11 Pre-programmed battery charge curves - including LiFePO4, GEL, AGM, open/sealed lead acid and Calcium
- One customizable charging profile - Can be set from the charger, no need for a computer
- Four Step Battery Charging - protects batteries and prevents overcharging via charging, conditioning and float modes
- Two battery outputs and one common negative - allows the user to charge 1 or 2 battery banks
- Two Digital Meters - displaying real time current and voltage measurements
- One power meter - showing % of charger capacity being used as well as power capacity remaining
- Active Power Factor Correction (PFC) - increases efficiency by almost 40% percent over older / non-PFC chargers
- Synchronized Rectification Output - FET based, increases charger efficiency by 10% over traditional diode based chargers
- High Voltage de-sulphation cycle - for customers with flooded lead acid batteries
- Stand-by Mode - increases battery life
- Digital Microprocessor Controlled High Voltage Protection System (Primary)
- An emergency backup analog controlled high voltage trip (Secondary)
- Constructed of rust resistant marine grade materials - Lightweight, compact footprint for easy installation
- 32 LED Information Panel - internal scan and systems check.
- Remote port for optional remote control w/ 10 meter cable - Remote can be surface, flush, or recess mounted
- Battery temperature sensor included
- The printed circuit boards are conformal coated for high humidity operations
- 30amp 12volt
Collect in Store
This item is available for collection.
People who bought this also bought...
