Grid
List
Barton Marine Boom Outhaul Kit
Marine Boom Outhaul Kit, 64mm Sheave Size 6 Pulley Block, 3.0m Length 26mm Drilled Track
Barton Marine Boomstrut Spare Part
Spare Parts - Pair 20mm X 1340mm Long Rods for 44040
Barton Marine Boomstrut With Webbing
Marine Boomstrut With Webbing Cradle Upto 25ft/7.5m & Folkboat Black
Barton Marine Lazy Jack Kit
Allow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape.Ideal for use with fully battened or conventional mainsails, these complete kits contain stainless steel, plastic-coated wires with blocks and fixing eyes attached. High quality braided...
Barton Marine Mainsheet Recirculat
Mainsheet Recirculating System 3:1 Purchase, Size 1, 1
Barton Marine Mast Base Organiser
Marine Mast Base Organiser 4 Block, Black
Barton Marine Reefing Kit Up To 9
A boxed complete single-line reefing kit that allows reefing lines to be led aft to the safety of the cockpit. This system makes reefing your mainsail a quick and easy operation – just lower the main to a predetermined mark on the halyard, tension the reefing line and re-trim the sail. Supplied as a complete set with all the parts and fixings required, together with full fitting instructions. All...
Barton Marine Slab Reefing Kit - Spare Slider
Spare Slider for slab reefing system 41496 suitable for yachts up to 12 m/ 40 ft.
Barton Slab Reefing Kit Yacht up to 8.5m (28ft)
Slab Reefing Kit#
Barton Slab Reefing Kits are supplied with sliding blocks which are held in place with spring-loaded plungers allowing fine tuning for both cruising and racing.
Manufactured from stainless steel and 'Spectro' anodised aluminium.
Supplied with 60cm of 25mmanodised 'T' track
Barton Slab Reefing Kit yacht up to 12m (39ft)
Slab Reefing Kit
Barton Slab Reefing Kits are supplied with sliding blocks which are held in place with spring-loaded plungers allowing fine tuning for both cruising and racing.
Manufactured from stainless steel and 'Spectro' anodised aluminium.
Supplied with 100cm of 32mm anodised 'T' track
Barton Boomstrut 6 - 7.5 mtrs
Barton Boomstrut Comes in five sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiencyThe boomstrut's lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom.
Pulling the boom downwith a conventional kicker causes the Boomstrut to flex upwards; releasing straightens...
Barton Boomstrut 7.5 - 9 mtrs
Barton Boomstrut Comes in five sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiency
The boomstrut's lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom.
Pulling the boom downwith a conventional kicker causes the Boomstrut to flex upwards; releasing...
Barton Boomstrut 9 - 10.5 mtrs
Barton Boomstrut Comes in five sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiency
The boomstrut's lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom.
Pulling the boom downwith a conventional kicker causes the Boomstrut to flex upwards; releasing straightens...
Barton Marine Boomstrut
The Folk Boat Boomstrut has a unique flexing action that responds to movement of the boom and provides constant support to prevent the boom from falling onto the deck.
Barton 41130 Single Line Reefing Kit
The Barton Single Line Reefing kit makes reefing your mainsail a quick and easy operation - just lower the main to a predetermined mark on the halyard, tension the reefing line and re-trim the sail. Suitable for boats up to 9 metres in length.
Supplied as boxed kit with all the parts and fixings required, together with full fitting instructions, all you need to provide is a line and a cleat or stopper.
Contents...
Barton Cascade Lightweight Lazy Jack Kit for yachts up to 10.5mtr
Barton Lazy Jack Kit allows mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape.
Barton cascade lightweight lazy jack kit for yachts up to 10.5mtr
Ideal for use with fully battened or conventional mainsails, these complete kits contain...
Barton Lazy Jack Kit Yachts up to 9mtr
Lazy Jack KitsAllow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape.
Barton Lightweight Lazy Jack Kit for yachts up to 9mtr
Barton lightweight lazy jack kit for yachts up to 9mtr.
Allow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom.
These lines can be slackened whilst sailing to avoid restricting sail shape.
Ideal for use with fully battened or conventional mainsails, these complete kits contain stainless steel, plastic-coated wires...
Barton Size 3 Drilled Mainsheet Track - To Clear
1.8mtr length of 30mm mainsheet track to clear, display marks and so not perfect with spectro grey anodised finish
Drilled mainsheet track constructed from aluminium, lightweight yet retains a high load capacity. The track is drilled and countersunk at 100mm centres, with the first hole at 50mm from the track end. A spectro grey anodised finish is extremely durable and offers friction free performance....
Barton Traveller 2:1 Purchase Kit Size 1
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)
Barton Traveller 2:1 Purchase Kit Size 2
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton Traveller 4:1 Purchase Kit Size 1
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton Traveller 4:1 Purchase Kit Size 2
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton 4:1 Purchase Kit Size1 Cleats on Traveller
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton 4:1 Purchase Kit Size2 Cleats on Traveller
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Wichard Boom Brake GybEasy
Wichard Boom Brake
Gybing remains one the of the most challenging operations of a sailing boat even for experienced sailors and could generate injuries and material damage.
An effecient and safe solution is the Gyb'Easy Wichard Boom Brake.
Components:
One Boom Brake
One Shackle attached to the boom brake and one to the boom saddles.
A specific line withstanding high frictions during the...
Barton Marine Bullseye Slide
Bullseye Swivel with Cam. Swivel bullseye accepts lines up to 12 mm diameter and features a stainless steel insert and K cam cleat with top fairlead.
Lewmar 29110400 Synchro C - Snap Large
Synchro c-snap Large
Suitiable for rope 6-12mm
Forespar 406300 Heavy Duty Telescopic Whisker Pole 79-138"
Sailing downwind is exhilarating and a great way to get to your destination whether racing or cruising to your favourite anchorage. Using a whisker pole to hold your jib or genoa and go wing on wing is the best use of the combination of both the main and foresail.
These Forespar telescoping whisker poles are two section twist and lock with Latch-Latch ends for positive attachment, 1-7/8" outer...
Forespar 407101 Heavy Duty Telescopic Whisker Pole 83-169"
Sailing downwind is exhilarating and a great way to get to your destination whether racing or cruising to your favorite anchorage. Using a whisker pole to hold your jib or genoa and go wing on wing is the best use of the combination of both the main and foresail.
These Forespar telescoping whisker poles are two section twist and lock with Latch-Latch ends for positive attachment, 2" outer tube...
30QT Orbit Winch Conversion Kit, E1 12V
40QT Orbit Winch Conversion Kit, E1 12V
FEATURES
Efficient, high quality European engineered and manufactured series wound motor.
Simplified electrical installation, no external control box required.
Illuminated "intelligent" LED push button.
Unrivalled monitoring and protection.
Available in either 12V or 24V.
All Orbit Winches™ size 30QT or 40QT can be easily...
30QT Orbit Winch, 2-Speed, QuickTrim, E1 12V
FEATURES
Now available with an E1 Single Speed Electric Motor.
Perfect for enjoying sailing short-handed or with friends and family,
Engineered with unsurpassed levels of functionality, monitoring, and protections.
Installation is simple with no external control box required, while the illuminated “intelligent” push button aids in several safety precautions including overload
protection,...
30QT Orbit Winch, 2-Speed, QuickTrim, E1 24V
30QT Orbit Winch, 2-Speed, QuickTrim, E1 24V
FEATURES
Now available with an E1 Single Speed Electric Motor.
Perfect for enjoying sailing short-handed or with friends and family,
Engineered with unsurpassed levels of functionality, monitoring, and protections.
Installation is simple with no external control box required, while the illuminated “intelligent” push button aids...
40QT Orbit Winch Conversion Kit, E1 12V
FEATURES
Efficient, high quality European engineered and manufactured series wound motor.
Simplified electrical installation, no external control box required.
Illuminated "intelligent" LED push button.
Unrivalled monitoring and protection.
Available in either 12V or 24V.
All Orbit Winches™ size 30QT or 40QT can be easily converted to electric with an E1 Electric...
40QT Orbit Winch Conversion Kit, E1 24V
40QT Orbit Winch Conversion Kit, E1 24V
FEATURES
Efficient, high quality European engineered and manufactured series wound motor.
Simplified electrical installation, no external control box required.
Illuminated "intelligent" LED push button.
Unrivalled monitoring and protection.
Available in either 12V or 24V.
All Orbit Winches™ size 30QT or 40QT can be easily...
40QT Orbit Winch, 2-Speed, QuickTrim, E1 12V
40QT Orbit Winch, 2-Speed, QuickTrim, E1 12V
FEATURES
Now available with an E1 Single Speed Electric Motor.
Perfect for enjoying sailing short-handed or with friends and family,
Engineered with unsurpassed levels of functionality, monitoring, and protections.
Installation is simple with no external control box required, while the illuminated “intelligent” push button aids...
40QT Orbit Winch, 2-Speed, QuickTrim, E1 24V
FEATURES
Now available with an E1 Single Speed Electric Motor.
Perfect for enjoying sailing short-handed or with friends and family,
Engineered with unsurpassed levels of functionality, monitoring, and protections.
Installation is simple with no external control box required, while the illuminated “intelligent” push button aids in several safety precautions including overload
protection,...
20ST Orbit Winch, 1-Speed
20ST Orbit Winch™, 1-Speed
Lightweight aluminium winch with self-tailer and Power Ribs™ ensures a controlled grip on the line at all times.
FEATURES
Sprung self-tailing jaws to accept 6 - 10mm line.
Proven Andersen winch gearing configuration.
Power Rib™ ensures a controlled grip on the line at all times, whether trimming or easing. Minimal rope wear compared to more...
30QT Orbit Winch with QuickTrim
30QT Orbit Winch with QuickTrim
40QT Orbit Winch with QuickTrim
40QT Orbit Winch with QuickTrim
45QT Orbit Winch, 3-Speed, QuickTrim
45QT Orbit Winch, 3-Speed, QuickTrim
Lightweight aluminium winch with QuickTrim™ self-tailer, 3 speeds, and Power Ribs™ for controlled grip on the line at all times.
FEATURES
Sprung self-tailing jaws to accept 8 - 14mm line.
QuickTrim™ patented self-tailing feature for rapid sail trim and smooth adjustment.
Ball bearings carry the thrust loads, roller bearings carry...
50QT Orbit Winch, 2-Speed, QuickTrim
50QT Orbit Winch, 2-Speed, QuickTrim
Lightweight aluminium winch with QuickTrim™ self-tailer, 2 speeds, and Power Ribs™ for controlled grip on the line at all times.
50QT Orbit Winch, 3-Speed, QuickTrim
FEATURES
Sprung self-tailing jaws to accept 8 - 14mm line.
QuickTrim™ patented self-tailing feature for rapid sail trim and smooth adjustment.
Ball bearings carry the thrust loads, roller bearings carry the radial loads of the drum to minimise rotational friction.
Proven gearing configuration.
Power Rib™ ensures a controlled grip on the line at all times, whether trimming...
Barton Marine Aluminium Winch Handle
The aluminium winch handles are designed to fit International Star sockets found in all makes of winch and standard deck filler caps.
Barton Marine Composite Winch
composite winches. Twin speed 23:1 A versatile alternative to conventional steel winches, the range of composite winches offer significant cost and weight savings and are truly low maintenance
Barton Marine Fabric Winch Handle
Fabric winch handle pocket Manufactured from hard wearing synthetic fabric