Grid
List
Raymarine (f) to RJ45 (M) cable
RayNet to RJ45 male cable.
Available in
Raymarine 12V Power Over Ethernet (POE) Injector
The power over ethernet injector used in the installation of T Series Joysticks
Raymarine 220mm (Ray63/73) Adaptor Cable
This cable allows a wireless handset hub to be connected to a Ray63 or Ray73
Raymarine 2m STNG bare wires for 0183
Raymarine 2m STNG bare wires for nmea 0183.
Raymarine 2m STNG R/A Power Cab Bare Wires
A right angle cable to connect a SeaTalkng backbone to a 12V switched power supply, or to connect power to an RMK-9.
The current marine industry standard. All current Raymarine MFDs are NMEA2000 certified. The standard utilizes the CAN (Control Area Network) design developed by Bosch for the automotive market but with messages/sentence appropriate for the marine industry. A multi-talker, multi-listener...
Raymarine 5 Way Connector
SeaTalk ng 5 Way Connector - Used for connecting spurs to the backbone. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable...
Raymarine 50m Mast Cable & Connector
Raymarine Wind Transducers 50m mast cable and connector.
Raymarine A06078 STNG (Female) to DeviceNet (Male) - 120mm
FeMale SeaTalkNG to Male Devicenet Cable - 120mm
Raymarine Backbone Cable
SeaTalk ng Backbone cable, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone.
The backbone carries both data and power to attached devices.
The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined...
Raymarine Blanking Plug
SeaTalk ng Blanking Plug - Inserted into unused spur connector positions in 5-way connector and T Piece. Place blanking plug in unused SeaTalkNG Spur sockets to protect them. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng.
Raymarine DeviceNet (Female) adaptor Cable (0.4m)
SeaTalk ng DeviceNet (female) adaptor cable - Spur to N2K Female. Adapts SeaTalk ng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 systems. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors...
Raymarine Devicenet (M) to STng (F) Adaptor 90d
Raymarine Devicenet (M) to STng (F) Adaptor 90d.
Raymarine DeviceNet (Male) adaptor Cable (1.5m)
SeaTalk ng DeviceNet (male) adaptor cable - Spur to N2K male. Adapts SeaTalk ng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 systems. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors...
Raymarine Devicenet Male to STNG Adaptor Cable
Raymarine Devicenet Male to STNG Adaptor Cable
Raymarine Devicenet(M) to Stng(F) Adaptor
Raymarine Devicenet(M) to Stng(F) Adaptor.
Raymarine E Series to Seatalk NG Adapter Cable
SeaTalk ng Adaptor Cable for E80 and E120 Classic Multifunction Displays
Raymarine Elbow to Straight Spur Cable 1m
90 degree Elbow to Straight Connector
Raymarine eS7 Video In / NMEA 0183 Cable
Video In / NMEA 0183 Cable for Raymarine eS7 Series MFD's.
Raymarine Extension Cable ST1
Pre-terminated SeaTalk Cable, for easy interlinking of SeaTalk instrument displays, autopilot displays, RL & C series displays and SeaTalk VHF's.
Raymarine External Alarm Buzzer
Compatible w/ Raymarine C-Series and E-Series Displays.
Raymarine In-Line STNG Terminator
Terminators go at each end of the Backbone. This is ideal for the RS130. Two Terminators are required per system.
Raymarine iTC-5 Instrument Transducer Converter Analogue Tx signals to SeaTalk ng
The iTC-5 will convert just about any Raymarine instrument analogue transducer signals and convert it into SeaTalk ng data.Transducers for Speed/Temperature, Depth, Wind and Rudder Angle can be connected to the ITC-5.
Transducers for Speed/Temperature, Depth, Wind and Rudder Angle can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods.
ITC-5 KEY FEATURES
Extended...
Raymarine RayNet (F) to STHS (M) Cable - 3m
RayNet female to SeaTalk HS male adaptor cable 3m.
Raymarine RayNet (Male) Right Angle Adaptor
Raymarine RayNet to Raynet right angle adaptor.
Raymarine Raynet Cable Pullers - 5 Pack
The Raymarine RayNet cable pullers are designed to securely attach to the twist lock plug on RayNet cables to provide a convenient point to attach a pull string for easy cable installation. Pack of 5.
Raymarine RayNet Female to RayNet Female
RayNet female to RayNet female cables used to connect RayNet devices together
Raymarine RayNet Male to RayNet Male cable - 100mm
The RayNet (M) to RayNet (M) Cable Joiner adapter lets you connect two standard RayNet networking cables together in instances where you need to extend the length of a cable run. .
Raymarine RayNet Male to STHS Male adaptor
RayNet (M) To STHS (M) Adapter 400mm Connect Classic or Wide to RayNet Radars.
Raymarine RayNet to RJ45 (F) Adaptor - 100mm
The Raymarine A80247 Raynet to RJ45 Female Adapter has an RJ45 Female Gland connector at one end, and a RayNet Female connector at the other end. The Gland makes the RJ45 Female socket watertight. This cable would typically be used to convert an RJ45 Digital Radar Cable to a RayNet Radar Cable, allowing you to connect the cable directly into the back of an ace or gS Series multifunction display, or...
Raymarine RayNet to RJ45 Adaptor - 100mm
Raymarine Raynet (Male) to RJ45 Adaptor cable
Raymarine Replacement Green Connector Blocks
TA104 Hull / NMEA Connector Kit
Raymarine SeaTalk Alarm Out Cable 1.5m
SeaTalk / Alarm Output Interface Cable (1.5m). Interface cable for connecting E-Series displays to Raymarine SeaTalk instrument networks. Also supports connection to external alarm. 6-Pin twist lock connector a E-Series display end, and wire leads at the other.
Raymarine SeaTalk NG Backbone Extender
SeaTalk ng Extender - Connects two backbone cables. Used for extending blue SeaTalk ng Backbone Cables. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s...
Raymarine SeaTalkHS Crossover Coupler
SeaTalk-HS Crossover Coupler (Two units only) for use with E Series multi-function displays.
Raymarine SeaTalkNG Devicenet Female to STNG Cable 120mm
This cable has an NMEA 2000 micro-C female connector on one end, to connect to the NMEA2000 device and a SeatalkNG white spur connector to plug into a T on the SeatalkNG backbone. For example, if you want to connect a LCJ Baroplug to a Raymarine system, this is what you would use.
Raymarine Spur to Stripped End Cable
Spur to Stripped End Cable Individual devices connect to the SeaTalkNG backbone by spur cables that run to T-pieces on the backbone. Only contains 5 cores - the Yellow Seatalk1 is not included.
Raymarine ST1 Adaptor Cable (3 Pin)
ST1 Adaptor Cable (3 Pin) - 15.7in (0.4m).
Raymarine ST1 to STNG Adaptor Kit
SEATALK 1 to SeaTalkNG Converter Kit. The SEATALK 1 to SeaTalkNG converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkNG data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems.
The SeaTalk to SeaTalkNG Converter kit is a compact solution that connects in-line with the SeaTalkNG instrument...
Raymarine ST1 to STNG Convertor only
Raymarine’s proprietary network design released at the same time as NMEA0183 that had several key advantages. SeaTalk1 is included in many Raymarine MFDs and instruments to provide legacy support but now NMEA 2000 offers several advantages over SeaTalk1.
Raymarine ST2 Adaptor Cable (5 Pin)
ST2 Adaptor Cable (5 Pin) - 15.7in (0.4m).
Raymarine St30/40/60 Power Cord Flat
St30/40/60 Power Cord Flat. Part number D229.
Raymarine ST40/60 20m Extension Cable
Length 20m.
Raymarine STng (M) to Devicenet (F) Adaptor
Raymarine STng (M) to Devicenet (F) Adaptor.
Raymarine STNG / NMEA 2000 Gateway Cable Kit
The Raymarine NMEA2K STNG gateway cable kit is an all in one kit to help integrate NMEA2000 components into your existing SeaTalkNG backbone system.
Raymarine STNG Auxillary Alarm with 1m Spur Cable
The Raymarine SeaTalkng Alarm Buzzer is a network accessory that repeats alarm and alert tones from compatible networked devices ensuring alarms and alerts can be heard on-deck and below decks as needed.
Raymarine STNG Backbone (F) to DeviceNet (F) Adapter Cable - 400mm
Connect SeaTalkng and NMEA2000 backbones together with these backbone cable adapters. Female STNG to Female DeviceNet / NMEA 2000 Version (Female to Male) Version also available, see product: 705-A80674
Raymarine STNG Backbone (F) to DeviceNet (M) Adapter Cable - 400mm
Connect SeaTalkng and NMEA2000 backbones together with these backbone cable adapters. Female STNG to Male DeviceNet / NMEA 2000 Version (Female to Female) Version also available, see product: 705-A80675
Raymarine STNG Backbone Kit
SeaTalkNG is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables.