Grid
List
Raymarine Spoke Clamp for ST4000 Mk2 Wheel Pilot
An additional or replacement clamp for the Raymarine ST4000 MK2 Wheel Pilot.
Raymarine ST1/2000+ Tiller Pilot Plug
PLUS TILLER PILOT 12V PLUG
Raymarine ST1/2000+ Tiller Pilot Plug and Socket
Raymarine ST1/2000+ Tiller Pilot Plug and Socket
ST1/2000+ Tiller Pilot Plug and Socket
Raymarine ST1/2000+ Tiller Pilot Socket
PLUS TILLER PILOT 12V SOCKET
Raymarine ST4000 Mk2 Back Cover
Replacement rear cover for Raymarine Autopilot ST4000 MK2 Wheel Drive.
Raymarine ST4000 Mk2 Bearing Kit
Bearing kit for Raymarine ST4000 Mk2 Wheel Pilot
Raymarine ST4000 Mk2 Belt Pulley Kit
Belt pulley kit for Raymarine ST4000 Mk2 Wheel Pilot
Raymarine ST4000 Mk2 Clutch Kit
Raymarine ST4000 MK2 Clutch Kit A18084. Replacement for grey Raymarine ST4000 MK2 Wheel Drive.
Raymarine ST4000 Mk2 Front Cover
Replacement Front Cover for Raymarine ST4000 Wheel Pilot
Raymarine ST4000 Mk2 Lever Kit
Clutch Lever for Raymarine ST4000 Mk2 Wheel Pilot
Raymarine ST4000 Mk2 Power Cable
Raymarine Mk2 Wheel Pilot Drive Power Cable for ST4000
Raymarine ST4000 MK2 Wheel Pilot Motor Assembly
Drive motor assembly for Raymarine ST4000 Mk2 (Grey Drive) Wheel Pilot.
Raymarine ST4000+ Wheel Drive Clamp Kit
Poke Clamp Kit for Autohelm 4000 Wheel Pilot or ST4000 Wheel Pilot. Wheel is black. Wheel is black
Includes 2x M4 x 12 Socket cap screws 1x Packing Piece 1x Clamp for 9.5mm (3/8") Dia Spoke (A) 1x Clamp for 12.5mm (1/2") Dia Spoke (B) 1x Clamp for 16.0mm (5/8") Dia Spoke (C) 1x Clamp for 19mm (3/4") Dia Spoke (D) 1x Clamp for 22mm (7/8") Dia Spoke (E) 1x Clamp for 25.4mm...
Raymarine STNG to SPX Moulded Cable - 1m
SPX course computer spur cable for connection to the SeaTalkNG backbone.
Raymarine Tiller Autopilot Cantilever Socket Assembly
Tiller Autopilot Cantilever Socket Assembly compatible with ST1000, ST2000, ST1000 plus, ST2000 plus and Evolution Tiller Drive
Raymarine Tiller Autopilot Pedestal Assembly 38mm (1.5”)
Pedestal Assembly 38mm (1.5")
Tiller Autopilot Pedestal Assembly 38mm, 1.5 Inch compatible with ST1000, ST2000, ST1000 plus, ST2000 plus and Evolution Tiller Drive
Raymarine Tiller Autopilot Pedestal Assembly 51mm, 2 Inch
Tiller Autopilot Pedestal Assembly 51mm, 2 Inch compatible with ST1000, ST2000, ST1000 plus, ST2000 plus and Evolution Tiller Drive
Raymarine Tiller Autopilot Pedestal Assembly 64mm, 2.5 Inch
Raymarine Tiller Autopilot Pedestal Assembly 64mm, 2.5 Inch
Tiller Autopilot Pedestal Assembly 64mm, 2.5 Inch compatible with ST1000, ST2000, ST1000 plus, ST2000 plus and Evolution Tiller Drive
Raymarine Tiller Autopilot Pedestal Assembly 76mm, 3 Inch
Raymarine Tiller Autopilot Pedestal Assembly 76mm, 3 Inch
Tiller Autopilot Pedestal Assembly 76mm, 3 Inch compatible with ST1000, ST2000, ST1000 plus, ST2000 plus and Evolution Tiller Drive
Raymarine Tiller Autopilot Pedestal Assembly 89mm, 3.5 Inch
Tiller Autopilot Pedestal Assembly 89mm, 3.5 Inch compatible with ST1000, ST2000, ST1000 plus, ST2000 plus and Evolution Tiller Drive
Raymarine Tiller Pilot Long Thread Tiller Pin (Sold Individually)
Tiller pilot long thread tiller pin.
Raymarine Tiller Pilot Short Thread Tiller Pin (Sold Individually)
Tiller pilot short thread tiller pin.
Raymarine Torque Restraint for ST4000 Mk2
Torque Restraint for Raymarine ST4000 Mk2 Wheel Pilot
Raymarine Type 1 12 Volt Autopilot Rotary Drive, Up to 11,000kg Displacement
The Type 1 12 volt rotary drive is designed for power and sailboat systems that can be driven from the helm position through a chain and sprocket e.g. cable and rod steering system.
The outstanding design of the Raymarine rotary drive unit provides smooth, powerful autopilot controlled steering with quiet operation.
Suitable for wheel steered boats up to 11,000 kg displacement. Works with ACU-200...
Raymarine Type 1 Linear Drive Motor
Raymarine Type 1 Linear Drive Motor. Includes Drive pulley, Drive motor and Ferrite.
Raymarine Type 2 12 Volt Autopilot Long Shaft Linear Drive, Up to 20,000kg Displacement
The Type 2 12 volt long shaft linear drive unit is one of the most commonly used drive types for sailing vessels.
Raymarine mechanical linear drives provide powerful thrust, fast hard-over times and quiet operation.
Mounted below decks, the linear drive moves the rudder directly by pushing the tiller arm or a rudder quadrant..
Suitable for wheel steered boats up to 20,000 kg displacement....
Raymarine Type 2 12 Volt Autopilot Rotary Drive, Up to 20,000kg Displacement
The Type 2 12 volt rotary drive is designed for power and sailboat systems that can be driven from the helm position through a chain and sprocket e.g. cable and rod steering system.
The outstanding design of the Raymarine rotary drive unit provides smooth, powerful autopilot controlled steering with quiet operation.
Suitable for wheel steered boats up to 20,000 kg displacement. Works with ACU-400...
Raymarine Type 2 24 Volt Autopilot Rotary Drive, Up to 20,000kg Displacement
The Type 2 24 volt rotary drive is designed for power and sailboat systems that can be driven from the helm position through a chain and sprocket e.g. cable and rod steering system.
The outstanding design of the Raymarine rotary drive unit provides smooth, powerful autopilot controlled steering with quiet operation.
Suitable for wheel steered boats up to 20,000 kg displacement. Works with ACU-400...
Raymarine Volvo Engine EVC Link Cable 1m
Volvo engine EVC link cable 1m used to link ECI-100 to compatible Volvo ECV engine
Raymarine Volvo Engine Y-Loom cable
Volvo Engine Y-Loom cable used to link Volvo EVC link cable to Volvo ECV engine if there are no free connectors
Raymarine Wheeldrive Motor Assembly
Raymarine Wheeldrive Motor for Autohelm 4000 WheelPilot or ST4000 WheelPilot. Suitable for MK1 (Black Drive).
Raymarine Yamaha Command-Link Plus Cable 1m
Yamaha Command-Link Plus Cable 1m used to link ECI-100 to compatible Yamaha engine
Raymarine ACU-150 Actuator Control Unit
The ACU-150 Autopilot control unit suitable for Type 1 hydraulic pumps. Max continuous current 12 amps. Has clutch output and can supply SeaTalk ng with 12 volt power. Not supplied with rudder reference sensor.
Raymarine Evolution ACU-200 Actuator Control Unit, Drive interface
The ACU-200 Autopilot control unit suitable for Type 1 hydraulic, linear and rotary mechanical drives. Max continuous current 15 amps. Has clutch output and can supply SeaTalk ng with 12 volt power. Supplied with rudder reference sensor.
Raymarine Evolution ACU-300 Actuator Control Unit, Drive interface
The ACU-300 Autopilot control unit suitable for solenoid controlled steering systems and Raymarine constant running hydraulic pumps.
Max continuous current 5 amps. Has no clutch output and can supply SeaTalk ng with 12 volt power. Supplied with rudder reference sensor.
Raymarine Evolution ACU-400 Actuator Control Unit, Drive interface
The ACU-400 Autopilot control unit suitable for Type 2 hydraulic, linear and rotary mechanical drives.
Max continuous current 30 amps. Has clutch output and can supply SeaTalk ng with 12 volt power. Supplied with rudder reference sensor.
Raymarine Evolution Cabling Kit SeaTalk ng
The Evolution cabling kit is a basic SeaTalk ng backbone kit contains the following parts : 1 x ng power cable, 1 x 5m ng backbone cable, 1 x 1m ng spur cable, 1 x ng 5 way block, 2 x ng T-pieces and 2 x ng terminators.
Raymarine Evolution EV-unit seal pack
Evolution EV-unit seal pack
Raymarine Evolution EV-unit wall bracket
Wall mounting bracket for Evolution EV1 or EV2 Sensor Core
Raymarine Evolution EV1 Sensor Core 9-axis pitch, roll, yaw and heading sensor
The EV-1 Sensor Core is at the centre of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing. Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards. Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions. Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes. Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays.
Raymarine Evolution EV2 Sensor Core 9-axis pitch, roll, yaw and heading sensor
The EV-2 is designed for the latest drive-by-wire steering systems. The intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing. Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards. Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions. Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes. Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays.
Raymarine RS150/EV1/EV2Microtalk Puck Mounting Kit
RS150/EV1/EV2/MicroTalk Puck Mount Clamshell Riser
Furuno FAP7011C NAVpilot Colour Control Head
FURUNO's NAVpilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course keeping capability, dynamically adjusting essential parameters for navigation i.e., vessel speed, trim, draught, tide and wind effects, dead band, weather, etc. These parameters are stored in the system memory and continuously optimized.
Furuno MCU-004 Remote Control for Navnet TZtouch/Navnet TZTouch2
Designed for those captains who have multiple TZtouch or TZtouch2 displays on their helm or bridge, a single MCU004 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another. The MCU004 Remote Control is a perfect companion for any helm or bridge.
Furuno MCU002 NavNet TZT Controller
The MCU002 Remote Controller is compatible for use with the entire NavNet TZtouch & TZtouch2 series. This controller really benefits installations where the displays are recessed and/or mounted a bit out of conventional reach. The design of the controller is extremely compact and light, allowing it to be installed anywhere, even as an "Armchair Controller", if desired.
Furuno Navpilot 711C Autopilot
FURUNO's NAVpilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course keeping capability, dynamically adjusting essential parameters for navigation i.e., vessel speed, trim, draught, tide and wind effects, dead band, weather, etc. These parameters are stored in the system memory and continuously optimized.
Garmin Actuator Power Cable
Actuator Power Cable Replacement for GHP 12 Autopilot System
Garmin Autopilot ECU for GHP 12 Autopilots
One of five main components of your GHP ™ 12 Autopilot System, the ECU connects and powers the course computer unit (CCU) and the hydraulic pump, controlling the pump based on information received from the CCU.
