Best Selling
Grid
List
3 Step Boat Ladder Fender
Majoni boat fender ladder available in white or blue.
Often referred to as the majoni step fender this style of fender is secured with a rope or cord by hanging round a cleat or mooring bollard and place over the side of the boat for easy access to and from the boat.
Especially useful for recovering crew from emergency overboard situations.
3 Step. 25 x 12 x 75 cm
Beware others stating...
Baltic 50N PVC Coated Worker Vest
Worker is a robust buoyancy aid in our industrial range. The outer cover is manufactured using a PVC coated nylon which makes the vest resistant to UV-light, oil and mould. The Worker has three sturdy waistbands to ensure a comfortable fit, lifting handles in the shoulder straps and retro- reflective patches on the shoulders.
This 50N Baltic Industrial Buoyancy Aid is ideal for site work and in...
Dometic MPS35 110/230V Power Supply BDF35 Compressor
MPS-35 Power adapter which enables your 12/24V fridge to operate on 230V mains system while on shore power/generator. Suitable for all Dometic Waeco compressor fridges with Danfoss BD35F compressors
Suitable for the CRX range of fridges
Suitable for permanent installation.
Switchmode technology allows priority for mains AC voltage when it becomes available
LED Dimmable Warm White Interior Strip Light 10-30v
This light is new to our range and offers a low cost attractive interior LED light. This light is low profile, surface mount 10-30v LED with integrated touch dimmer switch.
Material: Plastic
LED Type: 36 x 0.5W Warm white LED
Size: 255.0mm(L) x 45.0mm(W)
Voltage: 10-30 VDC
With touch switch
IP67
Teak Magazine Rack
Magazine Rack
Keep all you'r boating magazines to hand with this new style teak magazine rack
Rack Size: 265mm x 280mm x 110mm
Water Lubricated Shaft Cutlass Bearing 3/4 x 1-1/4 x 3
Cutlass Bearing
Shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell.
The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads.
The bearings support the shaft...
7" Roller Cage Frame
7" Roller cage frames are manufactured with a durable strong plastic handle.
5 Wire cage with 8mm wire arm.
Push-fit extension pole connection.
Fit 7" Paint Roller Sleeves.
Spinlock RF/H Precision Headsail Luff Feeder
Luff Feeder
The RF/H sail feeder is designed to guide a flaked genoa from the deck cleanly into the foil.
It is suspended from a cord between the tack and the pre-feeder: this allows it to swivel freely following the luf during hoisting
Vetus 35 Kgf Bow Thruster Kit
The original recreational thruster developed over many years, the VETUS bow thruster with 35kgf is suitable for boats from 6.0 to 10mtrs (20'-30') in length.
This kit is supplied with Thruster, GRP tunnel, time delay switch, fuse and fuse holder.
12 Volt DC version.
Easy to install
A single propeller creates less flow disturbance in a tunnel
Our unique propeller blade design...
Fibreglass Laminating Paddle Roller
High quality steel paddle roller designed for distributing resins to through heavy matt cloths.
Laminating Paddle Roller 21mm dia.
Roler Width: 50mm or 70mm
Plastic handle
Majoni 7ltr Marine Bucket
Majoni 7ltr Marine Bucket
7ltr bucket made of strong marine grade vinyl, tough buckets will spring back into shape without cracking if they get squashed in a locker.
Ergonomic handle with lanyard attachment point
Will not damage or scuff the side of your boat
26cm diameter
Colour of bucket may vary
Blue Gee Glassfibre Chopped Strand Mat 450g (0.92M x 1M)
Blue Gee
Glassfibre Chopped Strand Mat CSM(EB)
400g/Sq.M 0.92M x 1M
Liros Leaded Anchor Line 10mm x 30mtr
Attractive and strong Anchor Bag with special anchor line with lead weight built into the last 10 meters, can be used without chain, especially easy to handle, very easy to stow, stainless steel thimble spliced and whipped into end.
100% polyester, chafe and UV-resistant, white with blue colour coding yarn.
Features:
usable without chain
especially easy to handle
very easy to stow
Renovo Plastic Window Polish - 100 ml
The Renovo plastic window polish restores transparency, removes cloudiness
Reduces scratches and staining
Cleans and conditions in minutes
Just polish it on and polish it off
Size: 100ml bottle
Jabsco 35890-0010 Brass Bilge Strainer 1' Hose
Jabsco 35890-0000 Brass Bilge Strainer 3/4" & 1" Hose
13-3/4" O/A Length
1-3/4" Diameter
Perforated brass cylinder filter with mounting bracket
Perforated nylon removable filter element
30m orange line Buoy line
Polyethylene Orange Lifeline 30 Metre, 8mm Diameter Rope.
Orange is easily detected in water.
Light, waterproof and will not shrink in water.
Conforms to MED/ SOLAS
Baltic Dog & Pet Buoyancy Aid - Orange
High visibility and comfortable dog and pet buoyancy aid and harness that also protects your pet from cold and heat.
Wide webbing fixing straps with delrin buckles.
Reflective tape
Easily adjusted for a perfect fit
D- ring for the leash attachment
XS 0-3kg, S 3-8kg, M 8-15kg, L 15-40kg, XL 40+kg
5 year warranty
Baltic Poseidon Automatic inflate 165N
The Poseidon life jacket from Baltic is an inflatable life jacket with integrated safety harness.
Poseidon is designed to give the user maximum comfort in their life jacket with an ergonomic fit.
The valve and cartridge are positioned in a unique way to give the user maximum flexibility and comfort.
The Poseidon life jacket has extra good adjustment options and is pretty and flexible.
The...
Battery Terminals Screw fixing up to 40mm² Cable
Battery Terminal screw fixing for cable up to 40mm².
Sold in pairs (ie. 1 x +ve, 1 x -ve)
Gas Hose Assembly 450mm -1/4
Made in high pressure orange hose (not to exceed 17.5 Bar) and fitted with copper extension spigots held by swaged S/S ferrules.
RCD and BSS approved up to 1m
Harken SPRING-CAM (HSB56)
Standard Cam Cleat Spring
Nauticclean 14 passivation and rust remover gel
The PASSIVATION & RUST REMOVER GEL is the perfect solution to eliminate corrosion, oxidation on surfaces such as:
stainless – steel – alloys – aluminium – chrome.
Acid base gel developed to remove rust, deoxidize, degrease and passivate stainless steel, steel, aluminium. Easily removes rust and its passivating action protects against corrosion. The treated materials...
Polyester Webbing White For Buoyancy Bags
Buoyancy Bag Retainer Webbing
This White Nylon buoyancy bag webbing is 30mm wide and has a breaking strength of 750kg (1653lbs) and is sold per metre.
Rail Mount Outboard Engine Storage Bracket
Ideal for permanently mounting your outboard on the stern rail instead of having to remove it when not in use. Made of rigid, non-slip UV resistant plastic, the bracket provides a secure and stable mount for your auxiliary outboard engine. Designed to fit 25mm diameter rails.
22,8x15cm, White
Seaflo 200GPH Submersible & Inline Pump
Efficient slimline pumps for fresh or sea water pumping up to 80ºC and use as submersible or remove the filter for inline use.
Run time approx 20mins
Long life, quiet performance motor
Made from food grade materials
Removable strainer - converts from submersible to inline use
Includes 1mtr cable
Outlet: 13mm
Head: 5mtr
12v DC
Max Draw: 4.5a
Fuse Size: 7.4a
4 year warranty
Seago Go Lite 230 2.3mtr Inflatable Tender
In stock - last one available - same day dispatch (before 1500)
TruDesign Load Bearing Collar
These are designed for use with TruDesign Skin Fittings and Ball Valves. The Collar enables compliance to ABYC H-27 standard for the entire assembly.
Small for ½”, ¾” or 1″ sizes
Medium for 1¼” or 1½” sizes
Large for 2″ size
Features:
ABYC H-27 compliance for ¾”, 1”, 1¼”, 1½”,...
Waterline Design Mosquito Net - Small Hatch (350 x 350mm)
Install the Mosquito Screen without having to go outside, simply open the hatch and attach the suction cup on the window from inside and fasten the mosquito net in place by tightening the lock for the suction cup cord. The mosquito net is dense enough to keep small insects and gnats outside.
Easy to mount, magnet or sucker
Polyester net & chromed steel frame
Keep mosquitoes, gnats and...
Classic LED 12 All Round Navigation Lights
Lalizas Classic 12 LED Navigation Lights
Classic design for smaller dayboats and cruisers
Suitable for boats up to 12mtr
Waterproof, non corrosive, non magnetic design
Port, Starboard, Bicolour: 1nm
Stern, Masthead: 2nm
Size: H70mm x W60mm x D55cm
Fixing Centres: 32mm
Fixings: 2 x M5
International Toplac Plus 2.5 Litre
Toplac Plus from International is a silicone alkyd premium gloss yacht enamel for all substrates above the waterline.
Suitable for professionals and DIY boaters, the premium quality Toplac Plus can be applied with a brush or roller. Its superior flow and levelling properties means that tipping by brush is no longer required to obtain a perfect finish.
It contains UV filters for increased durability...
Tecnoseal 11 Kg Bolt on Zinc Anode 460mm
Tecnoseal saltwater zinc bolt-on anode as used by Princess, Fairline and Sunseeker.
Dimensions: L460 mm x W100mm x H45mm
Weight: 11 kg
19mm hole diameters
230mm hole centres
Battery Terminals Screw fixing up to 70mm² Cable
Battery Terminal screw fixing for cable up to 70mm².
Sold in pairs (ie. 1 x + ve, 1 x - ve)
Maindeck Coastal Salopette Trousers
Maindeck Coastal Salopette Trousers
Complimenting the Maindeck Coastal Jacket are these waterproof and breathable Salopette Trousers which use the innovative DC2™ fabric technology ensuring that you’re kept dry, warm and comfortable, in every condition on board on the open sea. Engineered with two layer hydrophobic coated polyamide shell provides excellent breathability whilst remaining...
Protective cover for contest 130
Replacement protective cover for Plastimo Contest 130 compass
White
Protects the compass from UV damage
Spinlock Safety Line Cutter
Spinlock Safety Line Cutter
With a guarded razor edge and stowed in a simple pouch worn on a lifejacket harness, the cutter is designed for severing safety lines under load
A/420 stainless steel blade, wax covered for protection
Provides the best protection against the risk of a safety line becoming unreleasable under load
By providing a reliable 'means of disconnection' anyone wearing the cutter...
D-Splicer Rope Splicing Kit
D-splicer offers a range of specialized rope splicing products for sailors and riggers. As the development of fibers for ropes has taken off in the last decades, new splicing tools are required. The pulling needles are complimentary to the conventional fids and the unique double needle clamps your line and makes it easy to pull through, especially in situations where little space is allowed and for...
Plastimo Rescue Ladder 4 Step
Plastimo Rescue Ladder
The 4 step Plastimo ladder is supplied in a canvas bag with two handles.
One to attach to the boat the other for the man overboard to grab hold of.
The bag simply pulls open and the ladder unfolds instantly, helping the person to get back onboard quickly.
Stainless Steel Stemhead Bow Roller 280mm
304 Stainless steel bow roller stemhead fitting with strong rubber roller, suitable for medium size cruisers and dayboats.
Dimensions: O/A L280 x W58mm
Base Length: 180mm
Fixings: 6 x M6csk
Tecnoseal Zinc 320 mm Euro anode
Tecnoseal Euro zinc bolt on bar anode for use on the hull.
For salt water use.
320 mm length, 65 mm width, 35 mm height,
2.20 kg weight
12 x 65 mm hole sizes, up to 160 mm hole centres
Antal XT40.2 - 2 Speed Self Tailing Winch
Antal XT40ST Cruise Two Speed Sheet Winch
Antal manufacture quality and powerful self tailing sheet winches suitable for both cruising or racing.
Available with either hard black anodised aluminium drum or chrome plated finish, they have an AISI 316 stainless steel central rod and roller bearings with bronze gears amd easy to maintain, simply unscrew the upper ring to immediately dismantle the...
Glomex Stainless Steel Adjustable Antenna Mount
Glomex heavy duty 4 way ratchet mount polished stainless steel design with handle locking, for deck or bulkhead mounting.
Suplied with a hole for GPS and antenna co-ax cable feed-thru and usable with antennas no longer than 9’ (2,7 m) in self supporting mode.
Standard 1”x14 thread
OA Height: 15cm
Base Dimensions:
Width: 100mm x Depth: 60mm
Guidi Bronze Lever Operated Ball Valve F-F Full Flow Bronze Body - 1 in 1/4
Guidi Bronze lever operated ball valve. Steel handle with plastic grip. Full flow operation with female and male BSP parallel ISO 228 thread.
Magma T10-380 Single Horizontal Round Rail Mount
Extremely strong and features 2-way adjustment for perfect horizontal leveling.
Made of 18-8 stainless steel and 356 anodized aluminum, it quickly detaches without tools for compact storage leaving no hardware on the rail.
Fits Standard Round Rails 1" (25.5 mm) For use with Magma Newport BBQ & T10-302 Bait/Filet Mate Serving/Cutting Table
Meridian Zero Brass Porthole Tide Clock - Small
Porthole Tide Clock - Small
The Porthole Range of Brass clocks and barometers is made of solid, unlacquered brass with an opening bezel and bevelled glass.
Tide clocks feature an additional hand which records lunar time over a 24 hours 50 minute period and so indicates successive high and low tides.
The Porthole Range comes in three sizes and is available as a clock, barometer or tide clock.
Back Flange...
Polyform Premium F4 Fender (1040x220mm)
Classic two eye F-series cylindrical fenders have set the standard for heavy duty fenders for close to 60 years. Widely accepted that polyform produce the toughest fenders, the newest generation are made by use of Polyform's unique, in-house developed and patented POLYMATIQ® technology.
Unique vinyl valve, seals securely
Even wall thickness for maimum strength and durability
Reinforced rope eyes
Two...
Rutland 913/914 Marine Mounting Pole Kit
Rutland 913/4 Marine Mounting Kit
Marlec’s 913/4 Marine Mounting Kit is a 2.4m (8ft) pole kit manufactured from stainless steel and supplied in 2 x 1.2 metre sections with joiner.
Two L shaped deck fixing plates are supplied to support the pole and attach to the deck along with brackets to which guys or stays should be attached.
Solid stays are recommended to provide a suitably rigid mount for...
Blue Performance Sea Rail Bag - Large
Blue Performance Large Sea Rail Bag
Features
Attach to the wire/rail using a Velcro flap and fix upright with two webbing straps on the lower wire/rail
Inner pocket with closure
Mesh side panels
Waterproof, mildew and UV resistant material
Ripstop lining
An integrated pocket in the base contains a waterproof cover manufactured from UV resistant Ripstop
Size: W400 x H320 x D70mm
Large Capacity Fuel Tanks - 43Ltr
Fuel Tank - 43Ltr
Heavy duty fixed boat fuel tanks, manufactured in polythene plastic, suitable for petrol and diesel.
The tank incorporates moulded handles and a multi purpose connection plate which includes filler, breather and fuel supply connections.
Height
230 MM
Length
650 MM
Width
350 MM