Barton
With a long manufacturing hsitory, Barton Marine is naturally proud of its heritage. From its UK factory based in Whistable, Kent, Barton Marine source the finest materials for there extensive range of sailing and cruising control systems.
Grid
List
Barton Marine Boom Outhaul Kit
Marine Boom Outhaul Kit, 64mm Sheave Size 6 Pulley Block, 3.0m Length 26mm Drilled Track
Barton Marine Boomstrut Spare Part
Spare Parts - Pair 20mm X 1340mm Long Rods for 44040
Barton Marine Boomstrut With Webbing
Marine Boomstrut With Webbing Cradle Upto 25ft/7.5m & Folkboat Black
Barton Marine Lazy Jack Kit
Allow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape.Ideal for use with fully battened or conventional mainsails, these complete kits contain stainless steel, plastic-coated wires with blocks and fixing eyes attached. High quality braided...
Barton Marine Mainsheet Recirculat
Mainsheet Recirculating System 3:1 Purchase, Size 1, 1
Barton Marine Mast Base Organiser
Marine Mast Base Organiser 4 Block, Black
Barton Marine Reefing Kit Up To 9
A boxed complete single-line reefing kit that allows reefing lines to be led aft to the safety of the cockpit. This system makes reefing your mainsail a quick and easy operation – just lower the main to a predetermined mark on the halyard, tension the reefing line and re-trim the sail. Supplied as a complete set with all the parts and fixings required, together with full fitting instructions. All...
Barton Marine Slab Reefing Kit - Spare Slider
Spare Slider for slab reefing system 41496 suitable for yachts up to 12 m/ 40 ft.
Barton Slab Reefing Kit Yacht up to 8.5m (28ft)
Slab Reefing Kit#
Barton Slab Reefing Kits are supplied with sliding blocks which are held in place with spring-loaded plungers allowing fine tuning for both cruising and racing.
Manufactured from stainless steel and 'Spectro' anodised aluminium.
Supplied with 60cm of 25mmanodised 'T' track
Barton Slab Reefing Kit yacht up to 12m (39ft)
Slab Reefing Kit
Barton Slab Reefing Kits are supplied with sliding blocks which are held in place with spring-loaded plungers allowing fine tuning for both cruising and racing.
Manufactured from stainless steel and 'Spectro' anodised aluminium.
Supplied with 100cm of 32mm anodised 'T' track
Barton Boomstrut 6 - 7.5 mtrs
Barton Boomstrut Comes in five sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiencyThe boomstrut's lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom.
Pulling the boom downwith a conventional kicker causes the Boomstrut to flex upwards; releasing straightens...
Barton Boomstrut 7.5 - 9 mtrs
Barton Boomstrut Comes in five sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiency
The boomstrut's lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom.
Pulling the boom downwith a conventional kicker causes the Boomstrut to flex upwards; releasing...
Barton Boomstrut 9 - 10.5 mtrs
Barton Boomstrut Comes in five sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiency
The boomstrut's lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom.
Pulling the boom downwith a conventional kicker causes the Boomstrut to flex upwards; releasing straightens...
Barton Marine Boomstrut
The Folk Boat Boomstrut has a unique flexing action that responds to movement of the boom and provides constant support to prevent the boom from falling onto the deck.
Barton Mast Base Organiser
The Barton Mast Base Organiser is finished in 'Spectro' grey anodising for a long lasting finish. It accepts up to four double tang blocks mounted on individual stainless steel swivel posts, but with just three deck fixing points.
The unit is fitted close to the mast base to accept halyards, reefing lines and topping lift and is designed to work in conjunction with our range of deck organisers, rope...
Barton 41130 Single Line Reefing Kit
The Barton Single Line Reefing kit makes reefing your mainsail a quick and easy operation - just lower the main to a predetermined mark on the halyard, tension the reefing line and re-trim the sail. Suitable for boats up to 9 metres in length.
Supplied as boxed kit with all the parts and fixings required, together with full fitting instructions, all you need to provide is a line and a cleat or stopper.
Contents...
Barton Cascade Lightweight Lazy Jack Kit for yachts up to 10.5mtr
Barton Lazy Jack Kit allows mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape.
Barton cascade lightweight lazy jack kit for yachts up to 10.5mtr
Ideal for use with fully battened or conventional mainsails, these complete kits contain...
Barton Lazy Jack Kit Yachts up to 9mtr
Lazy Jack KitsAllow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape.
Barton Lightweight Lazy Jack Kit for yachts up to 9mtr
Barton lightweight lazy jack kit for yachts up to 9mtr.
Allow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom.
These lines can be slackened whilst sailing to avoid restricting sail shape.
Ideal for use with fully battened or conventional mainsails, these complete kits contain stainless steel, plastic-coated wires...
Barton Size 3 Drilled Mainsheet Track - To Clear
1.8mtr length of 30mm mainsheet track to clear, display marks and so not perfect with spectro grey anodised finish
Drilled mainsheet track constructed from aluminium, lightweight yet retains a high load capacity. The track is drilled and countersunk at 100mm centres, with the first hole at 50mm from the track end. A spectro grey anodised finish is extremely durable and offers friction free performance....
Barton Traveller 2:1 Purchase Kit Size 1
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)
Barton Traveller 2:1 Purchase Kit Size 2
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton Traveller 4:1 Purchase Kit Size 1
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton Traveller 4:1 Purchase Kit Size 2
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton 4:1 Purchase Kit Size1 Cleats on Traveller
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton 4:1 Purchase Kit Size2 Cleats on Traveller
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton Marine Bullseye Slide
Bullseye Swivel with Cam. Swivel bullseye accepts lines up to 12 mm diameter and features a stainless steel insert and K cam cleat with top fairlead.
Barton Marine SkyDock 3:1 Storage
The ideal garage storage solution for dinghies, paddle boards, kayaks, roof box, camping equipment, in fact anything that needs lifting off the ground to save on storage space
Barton Marine SkyDock 4:1 Storage
The ideal garage storage solution for dinghies, paddle boards, kayaks, roof box, camping equipment, in fact anything that needs lifting off the ground to save on storage space
Barton Marine SkyLock 800 Block Au
SkyLock 800 Blocks - SWL 800Kg (1760lbs) The Marine SkyLock Blocks feature 316 stainless steel side plates, glass reinforced nylon cover plates and internal self-locking aluminium cam to lift and lock loads securely
Barton Marine Aluminium Winch Handle
The aluminium winch handles are designed to fit International Star sockets found in all makes of winch and standard deck filler caps.
Barton Marine Composite Winch
composite winches. Twin speed 23:1 A versatile alternative to conventional steel winches, the range of composite winches offer significant cost and weight savings and are truly low maintenance
Barton Marine Fabric Winch Handle
Fabric winch handle pocket Manufactured from hard wearing synthetic fabric
Barton Marine Martine Floating Win
The floating winch handles are designed to fit International Star sockets found in all makes of winch and standard deck filler caps. floating handles feature a moulded body with an integral moulded handle shaft. The Locking mechanism has a positive, easy action thumb switch.
Barton Marine PVC Winch Handle Poc
PVC winch handle pocket Manufactured from flexible dip moulded PVC to enable a wide range of handle types to be stored quickly and securely
Barton Marine Reefing Gear Handle
Reefing gear handle for use with the now discontinued ‘323’ roller reefing gear
Barton Marine Snubbing Winch
Snubbing winch Neat, lightweight unit which is ideal for use on larger dinghies and dayboats
Barton Marine Winch - Single Speed
Spare kit for single speed winch 8:1 (21200)
Barton Marine Winch - Twin Speed 1
Spare kit for twin speed winch 16:1 (21201)
Barton Marine Winch - Twin Speed 2
Spare kit for twin speed winch 23:1 (21202)
Barton Marine Winch Handle Holder
This black moulded low profile disc has a winch handle star in the centre so a winch handle can be locked in place when not in use
Barton Marine Wincher Large - Pair
A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing
Barton Marine Wincher Medium - Pai
A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing
Barton Marine Wincher Small - Pair
A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing
Barton Marine Wincher X-Large - P
A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing
Barton Floating Winch Handle
Floating Winch Handle
Barton floating winch handles feature a unique hollow moulded body with an integral moulded handle shaft.
A bi-directional locking action operates from an easy to use thumb switch.
Available in two sizes, float in fresh or salt water.
NOTE: Floating winch handles are all tested to a load of 110 kgs and are intended for lightweight use only.
Barton Winchers - Small
Barton Winchers are a specially designed rubber moulding which fits over the top of standard sheet winches converting them to self tailing.
Easy to fit and available in four sizes to suit most winches.
How they work:
The simple operation works when the line is sheeted under load causing the coils to climb up the drum and are then gripped by the underside of the rubber body.
When the sail is trimmed,...